Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.
International Interplate 855
International Interplate 855 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray used as a temporary protective primer for the coating of steelwork prior to the fabrication process.
International Interplate 855 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray.
International Interplate 855 is as a temporary protective primer for the coating of steelwork prior to the fabrication process. International Interplate 855 is suitable for overcoating with a wide range of high performance coating systems for use in a variety of environments, including offshore structures, marine environments, chemical and petrochemical plants, power stations and bridges.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 16.7m² per litre
- Touch Dry
- Brush, Roller, Spray
Be the first to ask a question about this product!
Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal substrates.
Sherwin-Williams Macropoxy C401 (formerly known as Epigrip C401) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide for use as an undercoat in conjunction with Sherwin-Williams Macropoxy high performance primers. Provides corrosion protection in a single coat, Network Rail approved.
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. It is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure. Apply by brush, roller, conventional sprayers or aireless spray One pack system Dry in as little...
A high solids, epoxy intermediate/finish coat, providing exceptionally high film builds (up to 200 microns DFT per coat), enabling maximum performance in a minimum number of coats. Can be used year round due to its ability to cure down to temperatures as low as 2°C.
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Penguard Universal as a great alternative. Jotun Penguard Plus is a two component amine cured high molecular weight epoxy coating. It is a fast drying, high solids, high build product specially designed as a universal, all round,...
This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Top Features Excellent immersion performance in water Suitable as a rust...
A metal primer with surface tolerant properties, can also be used as an intermediate coat, or self-priming finish over steel and zinc primers. Top Features Ready to apply after mixing Economical fit for use epoxy Used as a primer, intermediate, or finish coat VOC compliant to current AIM regulations
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
Nu-Steel QD Primer/Undercoat is a high performance metal primer suited to projects that require a fast turnaround time, for instance for coating railings in a public place. Advantages Phosphate-based Protects against corrosion Grey and Red Oxide colours Quick drying 12-month shelf life
Jotun Penguard Tie Coat is a two component polyamide cured epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as primer in a complete system in atmospheric environments. Recommended for offshore environments, refineries, power plants, bridges, buildings...
A specially designed primer from Jotun with 90% zinc dust content for highly corrosive environments where extended durability is required. It is a very high zinc dust containing product that provides excellent corrosion protection as part of a complete coating system and is to be used as primer in atmospheric environments.
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.
Nu-Steel Cladding Primer is a modified acrylic primer specifically developed for application for use on aluminium cladding, pre-fab buildings and industrial environments. Also ideal for Plastisol and polyester coated steel. Advantages Acrylic primer solution Excellent resistance to UV 12-month shelf life
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977