- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
HMG Vinyl Matt Emulsion
DEC101
HMG4540
HMG Vinyl Matt Emulsion is a premium quality water-based, flat matt emulsion.
- For interior use on wall and ceiling surfaces, where a flat non-reflective finish is required
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Vinyl Matt Emulsion is a premium quality water-based, flat matt emulsion.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- For interior use on wall and ceiling surfaces, where a flat non-reflective finish is required
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| HMG Vinyl Matt Emulsion White | HMG Vinyl Matt Emulsion Colours | |||||
| Volume Solids: | 49.6 % | 19.4 % | ||||
| VOC Content: | 0.005 Kg/l | 0.005 Kg/l | ||||
| SG: | - | - | ||||
| Viscosity: | 11,000 mPas | 1,000 mPas | ||||
| Density: | 1.378 g/cm³ | 1.045 g/cm³ | ||||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||||
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||||
| Pot Life: | - | - | ||||
| Flash Point: | n/a | n/a | ||||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Brush | 25 μm | 65 μm | |
| Roller | 25 μm | 65 μm | |
| HVLP | 25 μm | 65 μm | |
| Airless/Air-Assisted | 25 μm | 65 μm | |
Coverage: 15 square metres per litre at 25 microns dft (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 1 hour |
| Dry To Recoat: | 4 hours minimum |
| Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Brush | Roller | HVLP | Airless/Air-Assisted | ||
| Mixing Ratio: | Ready for use | Ready for use | Base: 5ltr | Base: 5ltr | |
| - | - | Thinner: >10% | Thinner: >10% | ||
| Thinner Options: | - | - | Water | Water | |
| Viscosity: | As supplied | As supplied | - | - | |
| Spray Gun Setup: | - | - | Tip size 0.38mm Tip angle 65° Max press 138bar | Tip size 0.38mm Tip angle 65° Max press 138bar | |
| Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | 1 - 2 coats | 1 - 2 coats | |
| Flash Off: | - | - | - | - | |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||||
|---|---|---|---|---|---|---|
| HMG Vinyl Matt Emulsion White | HMG Vinyl Matt Emulsion Colours | |||||
| Form: | According to product specification | According to product specification | ||||
| Colour: | According to product specification | According to product specification | ||||
| Odour: | Characteristic | Characteristic | ||||
| Odour Threshold: | Not determined | Not determined | ||||
| pH-value 20°C: | 8.3 | 8 | ||||
| Melting point/freezing point: | Undetermined | Undetermined | ||||
| Initial boiling point and boiling range: | 100°C | 100°C | ||||
| Flash Point: | n/a | n/a | ||||
| Flammability (solid, gas): | Not applicable | Not applicable | ||||
| Ignition temperature: | - | 370°C | ||||
| Decomposition temperature: | Not determined. | Not determined. | ||||
| Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | ||||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||||
| Explosion limits: Lower: | Not determined | Not determined | ||||
| Explosion limits: Upper: | Not determined | Not determined | ||||
| Vapour pressure at 20°C: | 23 hPa | 23 hPa | ||||
| Density at 20°C: | 1.378 g/cm³ | 1.045 g/cm³ | ||||
| Relative density: | Not determined | Not determined | ||||
| Vapour density: | Not determined | Not determined | ||||
| Evaporation rate: | Not determined | Not determined | ||||
| Solubility in / Miscibility with water: | Fully miscible | Fully miscible | ||||
| Partition coefficient: n-octanol/water: | Not determined | Not determined | ||||
| Viscosity: Dynamic at 20°C: | 11,000 mPas | 1,000 mPas | ||||
| Viscosity: Kinematic: | Not determined | Not determined | ||||
| Solvent content: Organic solvents: | 0.6% - Water: 48.9 % | 1.7% - Water: 76.2 % | ||||
| Solids content: | 49.6% | 19.4% | ||||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
4540-890087
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Water
- Application Method
- Brush, Roller, Spray, Airless Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed, Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L
5L
10L - Suitable Substrates
- Wall and ceiling surfaces
- Touch Dry (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- 4 hours minimum
- Fully Cured (at 20°C)
- 24 hours
- Density
- White: 1.378 g/cm³ - Colours: 1.045 g/cm³
- Solids by Volume
- White: 49.6% - Colours: 19.4%
- Recommended Dry Film Thickness
- 25μm
- Recommended Wet Film Thickness
- 65μm
- UN Number
- Not regulated
- Base Type
- Water-Based
- Suitable For Use On
- Ceilings
- Suitable For Use On
- Walls
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Roller
- Product Type
- Topcoat
- Colour Family
- Brown
- Colour Family
- Metallic
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Clear
- Colour Family
- Red
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- Blue
- Colour Family
- White
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Vinyl Matt Emulsion is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT