Sika Injection 201 CE
Sika Injection 201 CE is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible. Used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stone.
Sika Injection 201 CE is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.
- Sika Injection 201 CE is used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stone
- Sika Injection 201 CE can be used for the injection of the SikaFuko System (non re-injectable!)
- For use in water-bearing cracks under hydrostatic pressure, preliminary injection with shall be made with Sika Injection 101 RC
Features & Benefits
- Permanently elastic, can absorb limited movements
- No shrinkage in subsequent dry conditions
- Due to its low viscosity it can penetrates into cracks >0.2mm in width
- Cured Sika Injection 201 CE is inert and chemically-resistant
- Solvent-free, environmentally friendly, usable in ground water protection zones
- In cold temperatures (< +10°C) Sika Injection 201 CE can be accelerated using Sika Injection AC20
- Can be injected as a one component system (when no accelerator is used)
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sikaflex Tank N (available in packs of 20x 600cc sausages) is a 1-part elastic sealant for joints exposed to chemicals used in areas for the storage, filling and handling of water polluting liquids such as: Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, etc. Image already added
Sika WindowTape One is a multifunctional special tape with outstanding qualifications. The tape is 100% airtight and lowers the loss of convections heat substantially. The Sika WindowTape One has an optimal vapour diffusion gradient from inside to outside which assures an efficient humidity transport towards the cooler side and a fast drying of the joint.
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving with a joint width of 2mm and over. ADVANTAGES Sets hard, wont crack or wash out. Resists weeds and insects. Suitable for all types of block paving. Weathers naturally in line with the paving. Can withstand light vehicular traffic
Sika Expansion Tape 100 is an impregnated sealing tape used to protect from draught and dust as well to reduce heat loss and improve acoustics. Sika Expansion Tape 100 is used to seal joints between window / door frames and adjacent building components. Open vapour diffusion structure, permanently elastic, sound and thermal insulation.
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
Keim Spachtel is a silicate filler is ready to use and suitable for small crack repair and surface equalisation onto mineral surfaces. Top Advantages Purely mineral filler Potassium waterglass emulsion Interior and exterior use Apply with spatula This product is available as POA. Click here to email us for more information
The Sikadur Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system consists of a modified flexible Polyolefin waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different...
A flexibilised epoxy filler/sealant allowing direct pouring into horizontal joints. Hard and tough enough to protect joint edges from heavy wheel loading, but posesses sufficient flexibility to accomodate 10% movement of the joint width.
Sikaflex 291i (available as a pack of 12 x 300cc cartridges) is a non-sag 1-part polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture and forms a durable elastomer. Sikaflex 291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO)....
A solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater. Top Features Designed for underwater and other wet applications Self-priming on most surfaces and over most generic types of coatings VOC compliant to...
Sika Waterbar made from PVC-P can be used as flexible waterstops and are designed for the sealing of movement (expansion) and construction joints in new watertight concrete structures. Sika Waterbar are available in a range of different types, shapes and sizes to suit different types of structures and joint sealing applications.
Sika Boom GS is a 1-part, expansive, gun applied polyurethane fixing foam used for fixing, insulating and filling connection joints and for insulation against sound, cold and draughts etc.
Sikaflex AT Facade (packs of 20 x 600cc sausages) is a 1-part, moisture curing elastic sealant suitable for joint sealing of movement and connection joints between same or different porous and non-porous substrates such as concrete, brick, steel and other metals etc. Silicone free and over-paintable, odourless and solvent-free, good weathering and ageing...
SikaSwell S-2 is a one part polyurethane sealant which swells in contact with water. Used to seal waterproof-structures and fix SikaSwell Profiles or Sika Injectoflex. Easy to apply, good adhesion to various substrates, optimised expansion rate, therefore no damage to fresh concrete during curing, highly economical, swells in contact with water,...
Sikaflex 521 UV (available as a pack of 12 x 300cc or 20 x 600cc cartridges/sausages) is a one-component PUR-Hybrid sealant based on the Sika Silane Terminated Polymer (STP) technology. The product cures on exposure to atmospheric humidity to form a durable elastomer. Ageing and weathering resistant, it bonds well to a wide variety of substrates. Image...