Sika Injection 201 CE is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible. Used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in...
SikaBoom S is a 1-component, easy application, fast curing expansive polyurethane fixing foam made for filling and insulating. SikaBoom S is designed for fixing, insulating and filling connection joints around windows and door frames, pipe entries, air-conditioning vents and electrical equipment. SikaBoom S allows insulation against noise, cold and draughts after a single application.
SikaBoom S is a 1-component, easy application, fast curing expansive polyurethane fixing foam made for filling and insulating.
SikaBoom S is designed for fixing, insulating and filling connection joints around windows and door frames, pipe entries, air-conditioning vents and electrical equipment. SikaBoom S allows insulation against noise, cold and draughts after a single application.
Features & Benefits
- Easy application with valve nozzle (adapter)
- High expanding rate
- Fast curing
- Very good thermal insulation
- Effective sound dampening
- The minimum can temperature for application must be +10°C.
- In order to achieve a good quality foam, the can temperature should not vary more than 5 to 10°C from the ambient temperature.
- Protect the can from direct sunlight and temperatures above +50 °C (danger of explosion).
- For correct curing of the foam, sufficient moisture is necessary.
- Do not use on polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE / Teflon), and silicone, oil, grease and other separating agents.
- SikaBoom S is not resistant to UV light.
- Read all safety and technical recommendations which are printed on the SikaBoom S can.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving with a joint width of 2mm and over. ADVANTAGES Sets hard, wont crack or wash out. Resists weeds and insects. Suitable for all types of block paving. Weathers naturally in line with the paving. Can withstand light vehicular traffic
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood. Suitable for both, dry and damp...
Sikaflex Construction+ (available in packs of 20 x 600cc sausages) is a 1-part, moisture curing, flexible sealant suitable for movement and connection joints in concrete and masonry facades. Image already added
SikaBoom GS (Gun Grade) is used for fixing, insulating and filling connection joints around window and door frames, around air-conditioning vents and roller blind housings etc. It is also used for insulation against sound, cold and draughts etc.
Keim Dolomitspachtel is a ready-to-use silicate filler suitable for small crack repair and surface equalisation onto internal mineral surfaces. Top Advantages Mineral based Suitable for full cover and touch-up Maximum filling power This product is available as POA. Click here to email us for more information
Remmers Injection Paste 2K is a cement suspension for injecting cracks and hollow spaces in concrete, mortar, masonry work, natural stone masonry work. Used for strengthening and repairs of building underpinnings in the subsoil and for injection in rock and concrete for the restoration of dam masonry as well as for building repairs.
Sikaflex AT Facade (packs of 20 x 600cc sausages) is a 1-part, moisture curing elastic sealant suitable for joint sealing of movement and connection joints between same or different porous and non-porous substrates such as concrete, brick, steel and other metals etc. Silicone free and over-paintable, odourless and solvent-free, good weathering and ageing...
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
Sikasil Pool is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas. It is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other...
Sika Injection 306 is a very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time. Adjustable curing time between 8 and 50 minutes, permanently elastic, can absorb limited movements, capable of reversibly absorbing (swelling) about 75% by weight and releasing (shrinking) moisture, solvent free acrylic resin, high...
Sikadur 41 CF Rapid is a moisture tolerant, thixotropic, structural three part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C. Hardens without shrinkage, no primer needed, can be used for vertical and overhead applications (low sag), easy to mix and apply,...
SikaHyflex 260 Facade is a high-performance, UV-resistant, 1-part, professional weatherproofing sealant for facades. SikaHyflex 260 Facade is a one part, moisture curing, low modulus elastic joint sealant suitable for movement and connection joints in building envelopes with excellent adhesion to porous and non-porous substrates. Easy to smooth and very...
International Interline 921 is a two component, solvent free, chemically resistant epoxy phenolic caulking compound formulated to provide ease of application, and greater flexibility in scheduling of tank lining applications.