SikaCem 133S Gunite (formerly SikaCem 133 Gunite) is a cement based, polymer modified one component repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and trowel finished...
SikaMix Plus is an air entraining liquid plasticizing admixture designed specifically to cope with the different qualities of sand, cement and water found in South Wales and the West Country. SikaMix Plus is a liquid ultra stable ‘micro’ air entraining mortar plasticiser designed to enhance the workability and freeze thaw resistance of brick and block laying mortars.
SikaMix Plus is an air entraining liquid plasticizing admixture designed specifically to cope with the different qualities of sand, cement and water found in South Wales and the West Country.
SikaMix Plus is a liquid ultra stable ‘micro’ air entraining mortar plasticiser designed to enhance the workability and freeze thaw resistance of brick and block laying mortars. SikaMix Plus may be used to replace or supplement the use of lime, and is designed to maintain efficiency with variations in cement and aggregate sources. SikaMix Plus conforms fully to the requirements of EN 934 Part 3(2009) specification for air entraining (plasticising) mortar admixtures.
SikaMix Plus is designed to be used as a mortar plasticising admixture in brick and block laying mortars. The ‘micro’ air entraining properties of SikaMix Plus greatly improves the workability of the mortar whilst reducing water demand, thus greatly reducing the likelihood of cracking and crazing. SikaMix Plus will also provide enhanced resistance to frost attack in both wet and hardened mortar state.
Features and Benefits
- Ultra stable bubble structure.
- Uniform air entrainment structure.
- Works with most types of Portland Cement and difficult sands.
- Increased resistance to damage by freeze/thaw.
- Reduced segregation and bleed.
- Non corrosive to embedded metals.
- Increased working time.
- Easier and faster mortar spread.
- Can be used to replace lime.
- Can be used with P.F.A. containing mortars.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Ged on 12/05/2018|| |
Is this product suitable to use when making concrete?
No, SikaMix Plus is designed as a mortar additive rather than an additive for concrete.
Remmers Betofix RM is a fast repair mortar which provides fast concrete repairs in facade areas that are not statically or dynamically stressed. Remmers Betofix RM is used for closing broken out areas, gravel pockets, pores, uneven surfaces, spacers and holes. As well as filling of concrete surfaces and as mineral corrosion protection for reinforcement...
Sika MonoTop 110 QuickFix Mortar is a 1-component fast setting ready-to-use mortar based on cementitious binder and selected aggregates, designed as a fixing mortar characterized by the early strength development. Specially designed for all those works where a rapid setting mortar is needed, e.g: Fixing of brackets, plugs, shelves, pipes / Anchoring of...
Sika Accelerator is a chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C). May also be used neat with cement as a plugging aid. Non-corrosive to metals so may...
202 Vertical Surface Repair Mortar is a fast setting epoxy repair mortar for vertical and overhead repairs providing a strong and durable, weatherproof repair for concrete, brickwork, stonework and steel substrates. Ideal for repairs to spalled or damaged concrete structures and cosmetic refurbishment of old stone and brickwork.
Sika MonoTop 112 MultiUse Repair Mortar is a 1-component ready to use, thixotropic mortar, based on cementitious binder and selected aggregates, containing synthetic microfibers, for concrete repair. Used for restoration and repair of concrete elements, (columns, balcony edges), resurfacing of damaged areas on vertical or horizontal surfaces of concrete...
Remmers Betofix HQ3 is a cement-bound, chloride-free, factory-mixed, dry mortar that is ready to use after mixing with water. It can be produced with all conventional positive mixers. The grout material achieves very high early and ultimate strength in connection with very good flow and pumping properties. Image already added
Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors. ADVANTAGES Virtually indestructable Heavy traffic friendly Chemical resistant Does not shrink or crack Easy all-in-one packaging Interior/Exterior use No primer required in...
Sika X-Plug is a mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a tie bar. To fit tie bar size: 19.05mm – 25.04mm (¾ inch to 1 inch diameter) 11mm (7/16 inch) fixing nut. Quick and easy to install, secure mechanical plug, highly chemical resistant, can be installed from either side of tie bar hole, no...
Remmers Betofix R4 SR is a fibre-reinforced PCC/SPCC for the static repair of concrete structures in areas under high chemical loads (up to and including exposure class XA 3). Combines corrosion protection, a bonding layer and coarse and fine mortar, Certified in accordance with DIN EN 1504-3, Can be sprayed and applied by hand. Image already added
Rust-Oleum Asphalt Repair is a durable bitumen-based patch repair material for use on exterior pot-holed asphalt and concrete: Ideal for potholes in roads, car parks, paths and other concrete surfaces Simple to use - no mixing required Repairs can be driven over immediately after application For repairs 25mm – 100mm Withstands heavy...
Resupatch is a three-pack epoxy resin mortar designed for rapid concrete repair in heavy duty environments. ADVANTAGES Excellent mechanical properties Can be feather edged Abrasion and impact resistant Dust-free Concrete like in appearance Easy to apply Minimum surface preparation
SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout which meets the requirements of BS EN 1504-6. Used for the anchoring of reinforcing bars, general purpose grouting, under stanchion plates, filling cavities, voids, gaps and recesses, sealing around penetrations, machine and base plates, post fixings. For...
Rust-Oleum Epoxyshield Concrete Repair Mortar is for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork: Just add water, stir and its ready for use Light traffic possible after 24 hours (at 20°C) To recoat after 48 hours Sandable to a smooth finish For horizontal and...
Remmers Crete WR is a trowel applied coving and wall render based upon a polyurethane resin system. Designed specifically for use with Remmers polyurethane flooring in order to maintain the same standards of resistance to abrasion and chemical contact. Remmers Crete WR is used to form chemically resistant covings, fillets, gulleys, wall...
Sikadur 12 Pronto is a fast curing, self smoothing two part resin mortar based on reactive acrylic resins. Sikadur 12 Pronto is a fast curing multi purpose repair mortar for concrete roadways, runways, car park decks, industrial floors, stairs, precast concrete units etc. Can also be used as a grout for bridge bearings, foundations and rails, anchors and...