Keim Restauro Fixativ

3445

Keim Restauro Fixativ, a sol-silicate based binding agent for use with the Keim Restauro Lasur colour wash system on modern and historic render and stone surfaces, including brickwork and reconstituted stone and any cementitious or lime based mineral substrates.

  • Reacts chemically with the surface
  • Water vapour permeable
  • Consolidates the surface
  • Odourless and non-toxic
  • Also used for priming or pre-fixing
  • Click to jump down to Technical Data

This product is available as price on application. Click here to email us for more information.

Colour
Size
Quantity

Description

Keim Restauro Fixativ is a sol-silicate based binding agent for use with the Keim Restauro Lasur colour wash system (which is available in 250+ colours).

Applies to modern and historic render and stone surfaces, including brickwork and reconstituted stone and any cementitious or lime based mineral substrates in conjunction with the KEIM Restauro Lasur system.

Depending upon the required finish, KEIM Restauro Fixativ is mixed with KEIM Restauro Lasur in any ratio to give a translucent finish. KEIM Restauro Fixativ is also used for priming or pre- fixing.

This product/system requires site trials - Although readily available, please ensure a specification has been issued after site trials have taken place. The colour and degree of dilution affects the final finish and this must be known before purchase. Contact us for more infornmation on 0113 2455450 or [email protected]



Quick Links - Click To Jump To Section:




Features & Benefits


  • Sol-silicate based binding agent
  • For use with the Keim Restauro Lasur colour wash system
  • Mixes with KEIM Restauro Lasur in any ratio to give a translucent finish, depending upon the required finish
  • For application on modern and historic render and stone surfaces, including:
    • Brickwork
    • Reconstituted stone
    • Cementitious or lime based mineral substrates
  • Reacts chemically with the surface
  • Water vapour permeable
  • Consolidates the surface
  • Odourless and non-toxic
  • Also used for priming or pre-fixing



Product Properties


Material characteristics
Specific weight: approx. 1.05g/cm3



Application Instructions


 

Substrate Preparation


All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Mineral Paints may proceed.

 

Application


Priming coat: Highly absorbent or sanding substrates require a pre-treatment with undiluted KEIM Restauro Fixativ.

Finishing coat (KEIM Restauro Lasur): A low-pigment finishing coat may be applied, depending on the desired finish, using KEIM Restauro Lasur diluted with KEIM Restauro Fixativ.

A typical specification would be a two coat KEIM Restauro Lasur system, the first coat to be KEIM Restauro Fixativ, applied by brush and worked well into all surfaces. After a minimum period of 12 hours a final coat of KEIM Restauro Lasur may be applied, again diluted to the required level with KEIM Restauro Fixativ.

 

Application Conditions


Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

 

Consumption


First Coat:

  • KEIM Restauro Fixativ 0.15lt/m2

 

Finishing coat (KEIM Restauro Lasur, 3:1 ratio)

  • KEIM Restauro Lasur 0.04lt/m2
  • KEIM Restauro Fixativ 0.11lt/m2

Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.

 

Cleaning of Tools


Clean tools with water immediately after use.



Disposal


EC Waste Code EC Waste Code No. 06 02 99

Any residues must be emptied out of containers before recycling.

Product Details
3445

Data sheet

Manufacturer
KEIM
Interior / Exterior Use
Exterior
For Use On
Render, Stone, Brick
Application Method
Brush
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
5L
Parts
1
Base Type
Sol-silicate based
Interior/Exterior Use
Exterior
Solvent
Mixture; check Safety Data Sheet (section 3)
Suitable Substrates
Render and stone, brickwork, reconstituted stone, cementitious or lime based mineral
Key Features
Mixes with KEIM Restauro Lasur in any ratio to give a translucent finish, depending upon the required finish
Application
Brush
Coverage
0.11lt/m2
Recommended Thinner/Cleaner
Water (for cleaning)
Max. Application Temperature
30°C
Min. Application Temperature
5°C
Shelf Life (from date of manufacture)
Approx. 12 months, if kept cool but frost free in tightly closed containers.
UN Number
Void
UN Number
N/A
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Keim Restauro Lasur

Keim Restauro Lasur, a sol silicate based mineral paint system for use on stone surfaces to provide a colour wash or semi-transparent finish. Offers water repellency, vapour permeability and forms a chemical crystalline bond with the substrate. Provides a low pigment, colour matched finish on stone surfaces with the ability to match the...

In stock