Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products.
Walk on after 2 hours, floor coverings can be installed after 4 hours
Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. Additionally, there is no need to prime if being applied to a Tremco DPM. The product has a walk on time of 2 hours and can receive floor coverings after 4 hours.
SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products. It can be used under a DPM or over underfloor heating systems.
Coverage of up to 5m² per mix at a thickness of 3mm.
Thicknesses of 1mm to 12mm can be applied depending on surface profile, however for thicknesses above 8mm it is recommended that the product be bulked out with hard aggregate.
The above will depend on the condition of the substrate and method of preparation*
Cure Time
20°C: Approximately 2 hours for foot traffic and from 4 hours for the application of a damp proof membrane, floor coverings and loading. Do not apply at temperatures lower than 5°C
Storage
Store in dry shaded conditions between +10°C and +35°C
Shelf Life
12 Months when stored in its original unopened packaging
*Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tremco SX600 High Performance Smoothing Compound is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tremco ES100 One Coat Universal DPM is a two part, epoxy based damp proof membrane. It has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.Accommodates up to 97% RH Solvent free Very cost...
Tremco ES200 Fastrak Fast Curing Universal DPM is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status. Developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application....
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Waterproofing and Dampproofing page for more repair materials.