Eagle DoubleCoat Pro-Reflect Liquid Waterproofing
  • Eagle DoubleCoat Pro-Reflect Liquid Waterproofing
  • Eagle DoubleCoat Pro-Reflect Liquid Waterproofing

Eagle DoubleCoat Pro-Reflect Liquid Waterproofing

EDC

Eagle DoubleCoat Pro-Reflect Liquid Waterproofing, a liquid elastomeric waterproofing membrane reinforced with microfibers and high aluminium content, for waterproofing of most types of roof surfaces and exposed metal structures. Highly recommended for industrial units and warehouses.

  • For most roofs:
    • Galvanised steel
    • Iron zinc
    • Asbestos
    • Cement
    • Roofing felt
    • Asphalt
    • Bituminous roof coatings
  • Exposed metal structures:
    • Storage tanks
    • Pipes
    • Cladding


Shipping Options (Select at Checkout):

Economy Shipping (10-14 Working Days): £10 +VAT
Express Shipping (2-3 Working Days): £55 +VAT
Click & Collect (Next Working Day): FREE

Colour
Size
£66.69
VAT excluded

£80.03 Tax incl.
Quantity

Description

Eagle DoubleCoat Pro-Reflect Liquid Waterproofing provides waterproofing and solar reflection on most types of roof surfaces including galvanised steel, iron zinc, asbestos, cement, roofing felt, asphalt and bituminous roof coatings. Elastomeric and self-reinforced with microfibers and high aluminium content, Eagle DoubleCoat needs just one coat and can be installed quickly on its own or in combination with a carrier membrane which achieve up to 25 years guarantee, due to its tough polyester reinforcement and UV protection.

Eagle DoubleCoat also provides anticorrosion to exposed metal structures such as storage tanks, pipes and cladding, and is therefore highly recommended for industrial units and warehouses.



Features & Benefits


  • Corrosion protection and waterproofing on metal pipes and tanks - ideal for industrial units, warehouses & workshops
  • Waterproofing and solar reflection on most types of roof surfaces, including:
    • Galvanised steel
    • Iron zinc
    • Asbestos
    • Cement
    • Roofing felt
    • Asphalt
    • Bituminous roof coatings
  • Resistant to chemical attacks. DoubleCoat Pro-Reflect has been used in high aggressive environments such as chemical and dairy factories proving a high resistance to acid rain and chemical attacks.
  • Energy Saving. DoubleCoat Pro-Reflect has a high reflection capacity to provide owners and building developers an energy saving around 30% on electricity bill.
  • Self-reinforced. Double Coat Pro-Reflect contains micro-fibres that act as a carrier and reduces the application time due to the necessity to apply many coats with a reinforcement embedded.
  • Permanently Elastomeric. Cold Applied and one layer application. Bridges small holes, cracks and splits.
  • On new developments, DoubleCoat Pro-Reflect can be installed on its own or in combination with a carrier membrane which achieve up to 25 years guarantee, due to its tough polyester reinforcement and UV protection. The system can be installed in one day providing a fast solution for the contractor and a long-lasting waterproofing system for the building owner.
  • Any damage caused to the roof can be easily repaired with DoubleCoat Pro-Reflect.
  • Wide Range of guarantees available from 10 to 25 years. Exceeds ASTM D2824
  • Single Pack Product.



Application


All surfaces must be clean, dry and free from dust and loose debris. Freshly applied coatings should be allowed to weather for 2 weeks prior to the application of Double Coat. All traces of fungi and algae growth should be removed using a stiff bristled brush or low pressure water jet. Where algae and fungi have been removed, the surface should be treated with a fungicidal wash.

Stir the container thoroughly before use to ensure that no deposits are left at the bottom of the container. Double Coat may be applied by brush or sprayed. Do not apply in wet weather or when rain is threatened, or when poor drying conditions exists. As a protective measure on most well prepared surfaces which are in sound conditions, one layer of Double Coat is normally adequate.

Asbestos, cement and porous surfaces should be first primed with Eagle fast drying primer.



Coverage


The rate of application is between 1 -2 square meters per litre per coat, depending on the conditions of the surface. Do not coat windows, roof lights, glass or translucent sheets as they will constitute a hidden hazard.



Drying Time


Drying time is around 1-2 hours, in most of weather conditions.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
EDC

Data sheet

Manufacturer
Eagle
For Use On
Galvanized Steel, Iron Zinc, Asbestos, Cement, Roofing Felt, Asphalt
Application Method
Brush, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L, 25L
UN Number
UN1993
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send