TorVap VCL / CM
  • TorVap VCL / CM

TorVap VCL / CM

SS6000800

TorVap VCL / CM (SS6000800) is an aluminium faced, glass-fibre reinforced self-adhesive bituminous waterproofing membrane that forms a total vapour barrier and is used as both vapour control layer and carrier membrane in conjunction with Tor BUR system build.

Size
£226.80
VAT excluded

£272.16 Tax incl.
Quantity

Description

TorVap VCL / CM (SS6000800) is an aluminium faced, glass-fibre reinforced self-adhesive bituminous waterproofing membrane that forms a total vapour barrier and is used as both vapour control layer and carrier membrane in conjunction with Tor BUR system build.

Preparation

Ensure all surfaces are sound, clean, dry, smooth and dust free. Lightly abrade hard coatings and plastics. Remove corrosion, chalking etc from weathered surfaces. Treat porous surfaces with a suitable Tor primer/stabilising solution and allow to through-dry before applying TorVap VCL / CM.

Note: the compositions of “Plastisol” type surfaces can vary widely, so it is advisable to conduct adhesion test applications over materials of this type.

Application

Roll dimensions (nominal): 40 metres (L) x 1 metre (W) x 0.6mm (T) - Aluminium faced bituminous membrane

All surfaces on which TorVap VCL / CM have to be installed must be dry, clean, smooth and free from impurities. If the surface is porous, a suitable primer/sealer may be required. To achieve the best result, always start by laying the rolls from the lowest point and work upwards. The membrane must overlap at the edge by at least 50mm and on the top by at least 150mm. After installation, press the membrane well, being careful about details such as corners, edges, connections and overlaps. This membrane features an outer polyester film and cannot therefore be exposed directly to the sun for a long time.

Limitations

  • Do not apply to wet, frosted or icy surfaces.
  • Do not use the product on unsuitable surfaces – if necessary, conduct test applications prior to use.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
SS6000800
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Bullet Roof Reinforcement Matting

Bullet Roof Reinforcement Matting are rolls of polyester geotextile or chopped strand glass rolls for use with Bullet Roof products, available in the following configurations: Bullet Roof Mono Reinforcement Matting (PURG110)Can be used with Bullet Roof Mono and Bullet Roof Rapid. Supplied as a 50m x 1m roll. Bullet Mat 100 Glass...

Price £79.52
In stock

Tor Non-Taint Bitumen Primer

Tor Non-Taint Bitumen Primer (IM902) is a general purpose bituminous paint that can be used for steelwork, haysheds on farms etc. Also used for promoting adhesion of TorVap VCL / CM on Elastatherm TF square edged insulation, porous surfaces or in all cases where temperature is below 5°C.

Price £30.70
In stock

Tor Elastaseal Z Fibretex

Tor Elastaseal Z Fibretex (RC142) is a cold applied single pack, high solids, moisture activated, elastomeric urethane coating, containing inert reinforcement fibres. For use as a high build, heavy duty, fibre loaded stripe coating, free from solvent odour that provides durable, long term protection for roofs.

Price £99.00
In stock

Tor Elastascrim BT

Tor Elastascrim BT is a non-flammable, butyl, rubber based, self-adhesive tape with a polymeric textile reinforcement protection fleece. Used for the bridging of roof sheet lap joints, stabilised cracks, movement joints, small gaps, abutment details etc, prior to application of Tor roof waterproofing and protective coating systems etc.

Price £154.00
In stock

Tor Elastaseal FIA (Foaming Insulation Adhesive)

Tor Elastaseal FIA (Foaming Insulation Adhesive) is a fast curing polyurethane based aerosol foaming adhesive, applied by special aerosol gun, it meets Fire Class B1. Elastaseal FIA should be used for the bonding of roofing insulation boards to roofing substrates and membranes including asphalt, felt, vapour control layers, aged single ply membranes, etc.

Price £160.26
In stock

Sika Concrete Primer

Sika Concrete Primer is a two component, rapid curing, high solids, solvent based polyurea primer, for use with Sarnafil Liquid Detailing System.  Sika Concrete Primer is a two-component primer for consistent and durable adhesion between Sikalastic 621 TC and cementitious substrates.

Price £124.60
In stock

SikaSeal Lead & Gutter

SikaSeal Lead & Gutter is a low modulus, neutral cure sealant specifically designed to give exceptional adhesion to soft metals such as lead, brass etc. The product is specially formulated as an alternative to mortaring Lead Flashing and Sheet into Brick, Stone and Concrete. Will not stain or corrode soft metals unlike most conventional sealants, low dirt...

Price £76.03
In stock

Tor Elastaseal Z Embedment Coat

Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, providing durable,...

Price £240.00
In stock

Rust-Oleum Dacfill SB Embedment Coat

Rustoleum Dacfill SB Embedment Coat is a high-build basecoat for use in conjunction with Dacfill Glass Fibre Fleece to provide a reinforced base for the Dacfill SB Waterproofing system. Its deep pink colour offers a low sheen finish.

Price £227.63
In stock

Gaco Liquid Roof Tape

Gaco Liquid Roof Tape is a thick, high-build, rubber-like liquid comprised of 100% silicone and microfibers. The unique properties allow it to replace traditional rubber and mesh seam tape when used in conjunction with GacoPro Roof Coating.

Price £106.50
In stock

Sika MultiSeal

Sika MultiSeal is a self-adhesive sealing tape made from bitumen rubber compound, protected by a reinforced aluminium film. Use for general repair to existing flashing, roofs including sheet metal work, facades, broken roof tiles, leaking gutters, duct work, sealing projections through the roof. Very easy to apply, cold applied, self-adhesive, good...

Price £35.85
In stock

Tor Elastaseal Z Binder Sealer

Tor Elastaseal Z Binder Sealer (RC144) is a two component, moisture curing polyurethane resin solution for use as an all-aliphatic stabilising sealer and primer on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render, etc.

Price £135.12
In stock

Everbuild 902 Bitumen & Flashing Primer

Everbuild 902 Bitumen & Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints and roof coatings such as Everbuild 901 Black Bitumen Paint, Everbuild 905 All Weather Roof Coating and Everbuild 906 Bitumen Roofing Emulsion.

Price £71.54
In stock

Bullet Roof Epoxy Primer AC

An epoxy primer excellent anti-corrosion properties this primer is the perfect choice for steel and iron gutters or any other steel/iron surface. Top Features Good anti-corrosion properties Brush or airless spray applicable Application temperature from +5℃ (substrate)

Price £71.56
In stock

Bullet Roof GRP Roofing Resin

Bullet Roof GRP Roofing Resin is a high grade GRP resin that is not reblended, which allows for the purity Bullet Roof GRP Resin. Top Features Medium reactivity ortho Thixotropic Pre-accelerated Reduced styrene emission

Price £43.45
In stock