Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
Sherwin-Williams Nova-Plate 325
Nova-Plate 325 is an amine cured, glass and ceramic filled tank lining that utilises advanced epoxy novolac technology. It is engineered to protect cargo and steel tank interiors from chemicals stored at high temperatures and high pressures. It provides quick return to service, high film build and can be used in applications where conventional tank linings are not recommended.
Nova-Plate 325 offers asset owners a fast return to service, with the drying schedule allowing for foot traffic in six hours and cure to service in 24 hours, for a typical 750 microns DFT high temperature, high pressure application at 25°C. In maintenance applications, Nova-Plate 325 can be applied in a single coat up to 1500 microns DFT.
Features & Benefits
- Extends service life.
- Single coat application.
- Extends tank life.
- Saves on downtime.
- Innovative lining technology that provides high temperature and high pressure protection in crude processes.
- Saves time and money. High solids content provides single coat application up to 1500 microns eliminating two coat application.
- Prevents premature corrosion with edge protection feature.
- Cure to service in 24 hours.
Nova-Plate 325 has been designed for use in both onshore and offshore applications in Oil and Gas, Power and Mining:
- Oil storage tanks up to 149°C
- Secondary containment
- Cathodic protection systems
- Ethanol storage tanks
- Tanks and vessels
- Piping and valves.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 1.96m² per litre
- Touch Dry
- 2.5 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Proguard Ceramic-Polymer SF/LF is a two pack ceramic composite epoxy coating providing excellent abrasion and corrosion protection to a wide variety of substrates in aggressive environments, including tanks & vessels on ships, tubing and pipelines.
A two component novolac epoxy coating is a specially designed tank lining with excellent chemical resistance. It can be used as primer, mid coat and finish coat in atmospheric and immersed environments. Image already added
Tankguard HB Classic is a pure epoxy tank coating suitable for both transportation and storage of a wide range of chemicals including crude oil, aromatic and aliphatic solvents and others. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel...
Sherwin-Williams Macropoxy C251(formerly Epigrip C251) is a two-pack epoxy phenolic primer finish coating for use as part of a 2 coat system for the internal coating of storage tanks and vessels. Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework.
International Interline 850 is a two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining coating to provide corrosion protection for the internals of steel storage tanks and pipes containing a range of products.
Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Approved for Network Rail maintenance specifications, it can be used for both immersion and above the waterline service in marine, offshore, construction and...
Sikagard 63 N is a two part epoxy protective coating with high chemical resistance. Sikagard 63N is an abrasion resistant, universal coating material for use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika EpoCem), steel and aluminium designed for normal to highly aggressive chemical environments.
International Interline 955 is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance. International Interline 955 is a chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
Jotun Tankguard SF is a two component solvent free amine cured novolac epoxy coating that is a specially designed tank lining with very good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Jotun Balloxy HB Lumi is a version of Balloxy HB Light – containing luminous pigments. This surface tolerant, high solids, high build paint for water ballast tank is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
International Interline 399 is a high performance, highly crosslinked two component epoxy novolac tank lining, with excellent heat and solvent resistance suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C (266°F).
Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present, therefore also suitable for the use in closed structures containing biogenic sulphuric acid. Sikalastic 844 XT can only be spray applied with special two part hot spray equipment.
Jotun Balloxy HB Light is a surface tolerant, high solids, high build epoxy mastic coating for water ballast tanks. It is specially designed for areas where optimum surface preparation is not possible or desired and provides long lasting protection in environments with high corrosivity. Jotun Balloxy HB Light can be used as primer, mid coat or finish coat...
Jotun Jotamastic SF Alu is a two component polyamine cured epoxy mastic coating aluminium pigmented to provide a metallic silvery finish that is a surface tolerant, solvent free, high build product well suited for early immersion. Specially designed for areas where optimum surface preparation is not possible or desired.
Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...