Mathys Fassithane Matt
  • Mathys Fassithane Matt

Mathys Fassithane Matt

634.1.1

Mathys Fassithane Matt is a hard, clear, durable finishing varnish for wood that is based on polyurethane alkyd resins. Quick drying, does not yellow and scratch and wear resistant.

  • Quick drying
  • Does not yellow
  • Scratch and wear resistant
  • No tendency to wrinkle when applying thick layers
  • Indoor use only - easy to clean
Colour
Size
£15.59
VAT excluded

£18.71 Tax incl.
Quantity

Description

Mathys Fassithane Matt

Mathys Fassithane Matt is a hard, clear, durable finishing varnish for wood that is based on polyurethane alkyd resins.

Features & Benefits

  • Quick drying
  • Does not yellow
  • Scratch and wear resistant
  • No tendency to wrinkle when applying thick layers
  • Indoor use only - easy to clean

Technical Data

  • Density: 0,93 - 0,95
  • Gloss Level: Matt
  • Solids content in volume: 44 - 46 %
  • Solids Content in weight: 53 - 55 %

Drying Times At 20°C/RH 50%

  • Touch dry: 1½ hour
  • Dry to handle: 2 hours
  • Dry to recoat: 6 hours
  • Fully cured: 7 days

Theoretical Consumption

± 15 m²/l per coat

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

The substrate must be smooth and completely dry and clean. New wood: rub down and make dustfree (use a cloth damped in white spirit). Degrease resinous or exotic wood with thinner. Remove old varnish layers with a paint stripper (Rapid Super). After this rub down lightly and clean with white spirit. Old varnish layers with good adhesion: rub down lightly and clean. Restore discoloured parts with Fassitek and rub down.

New Wood

  • Impregnate with Adex or Fassitek if it is necessary to colour the wood.
  • If colouring is not necessary, first apply a thinned coat Fassithane Matt

Application Conditions

Apply in a dry and well-ventilated area. Temperature of air, substrate and coating material between 10 and 35°C and relative humidity below 80%. The substrate temperature must be at least 3°C above dew point.

Remarks

In case the recoat time between successive coats is longer than 24 hours, it is necessary to clean the surface with a clothed soaked in white spirit in order to achieve a good adhesion.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
634.1.1

Data sheet

Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 hours
Dry to Recoat (at 20°C)
6 hours
Fully Cured (at 20°C)
7 days
Coverage
15m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
10°C
Density
0,93 - 0,95
Solids by Volume
44 - 46 %
VOC
400 g/l m
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C
Touch Dry
1.5 hours
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 22

Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of 'spots' of acrylic paints and acrylic fixing paints (e.g. on glass). Best used to dilute the following products: Primer 44 Fassiclor Galvaprim Vernac Gloss Vernac Satin

Price £6.41
In stock
16 other products in the same category:

Solignum Ionolac

A lead-free gloss paint giving excellent durability and protection on metal, wood and other surfaces, equally suitable for internal use. 

Price £20.25
In stock

Carboline Carbocrylic 3359 DTM

A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...

Price £92.81
In stock

Timberex Enviro

A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.

Price £23.00
In stock

HMG Pre Cat AV Colours

HMG Pre Cat AV Colours.  Fast drying 1K lacquer with good film build and excellent application characteristics. Available in a range of coloured sheen finishes. Formulated for use on wood substrates. For interior use only. Available in a wide colour range including RAL & BS. Click to jump down to Technical Data

Price £15.65
In stock

Blackfriar Boiled Linseed Oil

Blackfriar Boiled Linseed Oil Penetrates deep into wood, providing an attractive ruby tint with a light gloss finish. Blackfriar Boiled Linseed Oil can be used inside and outside and is ideal for bare woods except oak, and is also useful for softening metal glazing putty. Product Features Interior and exterior use. Nourishes and protects...

Price £22.99
In stock

RSL Resupen WB

Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...

Price £105.44
In stock

Mathys Fassilux Gloss

Mathys Fassilux Gloss is a solvent based high gloss enamel based on alkyd resins for use as a topcoat for interior and exterior woodwork. Applicable on wood and all pretreated not alkaline substrates. Simple and fast application Excellent flow Excellent scratch and wear resistance Good outdoor durability, weatherproof Quick drying Good...

Price £13.90
In stock

Coo-Var Eggshell

Coo-Var Eggshell is an interior and exterior oil-based finish for primed wood, metal and masonry that dries to a white eggshell finish. Product Features Interior/Exterior use Decorative Eggshell/Satin finish Suitable for wood, metal or masonry Off-white finish Great for Tudor brickwork and beams

Price £12.33
In stock

Coo-Var Matt Black (Water Based)

Coo-Var Matt Black Water Based is a high opacity flat black acrylic coating providing a finish to internal surfaces anywhere a non-reflective surface is required. Product Features Water-based Less odours than solvent-based Fast drying Non-reflective Decorative Apply directly to wood and masonry Can be used on cement

Price £13.89
In stock

Rust-Oleum 4900 Polycoat 2K

Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...

Price £25.52
In stock

Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £19.95
In stock

Timberex Hard-Wax Oil

Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.

Price £19.32
In stock

Coo-Var Acrylic Varnish

Coo-Var Acrylic Varnish is a water based clear gloss varnish. An ideal alternative to solvent based products. For inside use only. Product Features Quick drying Safer alternative to solvent-based products Gloss & Eggshell finishes Interior use Four tin sizes available

Price £16.96
In stock

Mathys Fassithane Satin

Mathys Fassithane Satin is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers Use indoors and...

Price £15.59
In stock

Timberex Wax-Oil

Timberex Wax-Oil greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Made from fast curing natural oils and carnuba wax it cures to a deep satin finish.

Price £20.03
In stock

Ardenbrite Metallic Paint (Water Based)

Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.

Price £13.42
In stock