Coo-Var MDF Primer
Coo-Var MDF Primer is a quick drying, water based primer for MDF surfaces. It can be used to prime MDF furniture, desks, doors and more. Extremely easy to apply.
- For interior use
- Matt finish
- Application: Brush
- Drying time: Touch Dry 30 mins or 2 hours hard dry
- Overcoat time: 6 hours
- Estimated coverage: 13m² per litre
- Available in sizes from 500ml up to 5L
**Available for delivery - see Delivery Options below**
Coo-Var MDF Primer is a water based primer for MDF surfaces. It can be used to prime MDF furniture, desks, doors and more.
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Do not apply when temperature will be at 7°C or below - as dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
None, apply direct to MDF.
Do not paint when temperature will be at 7°C or below during the painting and drying process.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
- Water / Solvent Based
- For Use On
- Application Method
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- 500ml, 1L, 2.5L, 5L
- Dry to Recoat (at 20°C)
- 6 hours
- 13m² per litre
- Recommended Thinner/Cleaner
- Solids by Volume
- Touch Dry
- 30 Mins
- Recommended Dry Film Thickness
- 35 to 40 microns
- Recommended Wet Film Thickness
- 75 microns
- UN Number
|Masha on 2020-11-22 20:02:09|| |
Hello. I bought a moisture proof mdf that I wanted to use as a kitchen table. I chose the moisture proof one because of the green color. Anyhow, it is not water proof and the stains can not be cleaned so I wanted to use a primer to protect it and make the cleaning easier. Does a transparent/clear version exist? Is the product compatible with the moisture resistant mdf?
Moisture resistant MDF would need to be thoroughly abraded prior to application of the primer. The primer must then be overcoated with a compatible topcoat as it cannot be left as a finish.