Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 186 products.
Active filters
Resichem 575 Expansion Joint Filler is a pitch modified two part polyurethane sealant for filling/sealing expansion joints. Suitable for concrete paved areas, airfield runways, major carriageways, docks, container depots, industrial factories and warehousing. It is capable of accommodating movement and severe climatic conditions, as well as...
£171.00 (incl. VAT)
£142.50 (ex. VAT)
Resichem 576 Quartz Screed is an epoxy resin based solvent free high build trowel screed. The product has been designed to be applied to uneven concrete surfaces to a wet film thickness of 10-30mm (3/8”- 1 1/4”). On curing the product will ensure any imperfections on the surface of the concrete are reduced. Ideal for coating concrete floors,...
£225.00 (incl. VAT)
£187.50 (ex. VAT)
Resichem 577 Chem Screed is a chemical resistant epoxy resin based solvent free high build trowel screed. The product has been designed to be applied to uneven concrete surfaces subject to chemical attack from strong industrial chemicals. Ideal for rebuilding problematic cementitious surfaces in chemical process areas such as floors, plinths,...
£594.00 (incl. VAT)
£495.00 (ex. VAT)
Resichem 575 Expansion Joint Filler Primer is a single component, solvent borne, polyurethane priming coat to be used with Resichem 575 expansion joint filler. Suitable for priming dry, porous surfaces which form the bonding face to an expansion joint. It can be used on concrete, cementitious or epoxy mortars, timber, and porous stone...
£102.60 (incl. VAT)
£85.50 (ex. VAT)
Fosroc Cure B is a spray on temporary curing membrane to retain moisture in freshly placed concrete.Ideal for use as a spray applied membrane to retain moisture in concrete for effective curing Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
£141.31 (incl. VAT)
£117.76 (ex. VAT)
Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with astatic mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Ideal for use on concrete (solid, porous and light), masonry and hollow bricks, and...
£391.70 (incl. VAT)
£326.42 (ex. VAT)
Please Note: To check availability and to order this product please contact our Technical Department on 0113 2455450 (option 2). Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel...
£490.78 (incl. VAT)
£408.98 (ex. VAT)
Fosroc Nitomortar S is a solvent-free high strength, abrasion-resistant epoxy reinstatement mortar. Suitable for use for the fast and permanent reinstatement of concrete, particularly where high strength, abrasion-resistance and resistance to chemicals is required. The product is designed for horizontal use but can be applied vertically,...
£168.61 (incl. VAT)
£140.51 (ex. VAT)
Fosroc Nitomortar HB is based on a high performance solvent-free epoxy resin system. The special lightweight filler is specifically designed to give excellent ‘hanging’ properties for vertical and overhead workFor the fast and permanent reinstatement of concrete, particularly where resistance to chemicals is required - Equal to the...
£287.42 (incl. VAT)
£239.52 (ex. VAT)
Fosroc Nitobond AR is a single component polymer emulsion and recommended primer for the Renderoc cementitious repair systems.Nitobond AR can be used as a curing membrane and also a concrete surface sealer in non-traffic areas May also be used as an economical dust proofer and surface sealer for non-trafficked cementitious surfaces...
£158.08 (incl. VAT)
£131.73 (ex. VAT)
Fosroc Nitobond EP is a 100% solids solvent-free epoxy resin containing pigments and fine filler. Used for bonding new cementitious mortars and screeds including Patchroc GP and Paveroc to existing cementitious surfaces.Ideal for extensions and repairs to concrete in factories, loading bays, trucking aisles, bridges, roads, bonded or...
£124.76 (incl. VAT)
£103.97 (ex. VAT)
Fosroc Nitobond SBR is a modified styrene butadiene rubber emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries.For improving and bonding concrete repair mortars, floor toppings and screeds, waterproof renders and cementitious slurries Being...
£110.14 (incl. VAT)
£91.78 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Always refer to product datasheets and brochures to check whether a product can be used on internal or external concrete.
Concrete damage can occur from a wide range of reasons - some more obvious than others:
Concrete repair mortars, screeds, fillers, and coatings can be used on a wide variety of surfaces and situations, including:
Rawlins Paints lists products that range from advised professional use only, to domestic and commercial products for ease-of-use and economic and cost-saving repairs:
Whether you are giving concrete a new lease of life, or repairing impact damage in an 'emergency', get the best prices on the leading products, only at Rawlins Paints.
