Rawlins Paints stock a wide range of Selemix paints, coatings and maintenance products. Products with a colour wheel on the image are available in either hundreds or thousands of colours.
Can't find what you need? Give our specialist Technical Support Team a call on 0113 245 5450.
Please click a 'quick link' below:
Selemix 4-0440/4-0441 2K Epoxy HB Anticorrosive Primer
2K high build epoxy primer containing anticorrosive pigments, for use on steel, zinc plated steel and aluminium providing excellent protection against corrosion. Fast Curing version also available Outstanding chemical resistance - Low VOC content When used with Selemix 2K Topcoats, gives a high performance coating system suitable for...
Selemix 4-0500 2K Polyurethane Direct Primer
High build 2K polyurethane primer used in conjunction with Selemix 2K Acrylic and PU topcoats for a system suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications. Gives good corrosion resistance and can be used on Steel, Cast Iron, Light Alloys,...
Selemix 7-413 2K Epoxy Primer
Tintable primer with 6,700+ colours and a fast drying time for use in a wet on wet system when recoated with 2K Topcoats. For use on Steel, Cast Iron, Aluminium, Light Alloys, GRP & Previously Painted Surfaces Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural & construction...
Selemix 7-414 2K Epoxy Vinyl Primer
Fast drying tintable primer with 6,700+ colour options, may be used in a wet-on-wet system. For steel, cast iron, light alloys, and can be recoated without sanding even after a long period. Suitable for use on previously painted surfaces, machinery, signage and metal fabrication Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and...
Selemix 4-0490 2K Epoxy Zinc Rich Primer
Grey/reddish grey two component Zinc Rich Epoxy Primer with outstanding resistance to severe weathering. For use on structural steel, machinery, pipe and tank exteriors & general maintenance The high zinc content of the primer film gives a cathodic protection if the film is damaged, as it combines the toughness of an epoxy with the...
Selemix 8-450 2K WB Epoxy Primer
A tintable two component waterborne epoxy primer designed for aluminium, bare steel and galvanised steel surfaces, in 6,700+ colours. It is suitable for use in moderately aggressive environments, and it gives good resistance to water and solvents and good resistance to abrasion. For general industrial painting where a low VOC or a...
 |
Selemix 7-530/7-531 2K Polyurethane Direct Topcoat HS (10 GU)
Versatile, high solids 2-pack PU with 10% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-532/7-533 2K Polyurethane Direct Topcoat HS (30 GU)
Versatile, high solids 2-pack PU with 30% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-534/7-535 2K Polyurethane Direct Topcoat HS (50 GU)
Versatile, high solids 2-pack PU with 50% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-538/7-539 2K Polyurethane Direct Topcoat HS (80 GU)
Versatile, high solids 2-pack PU with 80% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys and GRP Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+...
Selemix 8-110/8-111 2K WB Acrylic Topcoat
A 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here. Excellent gloss and colour retention and excellent hardness Can be used over...
Selemix 7-534/7-535 2K Polyurethane Direct Topcoat Economy (50 GU)
Versatile, 2-pack PU with 50% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over...
|
Selemix 7-159 Direct Pro High Gloss (Medium)
Versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer for steel, galvanised steel, aluminium and painted/primed surfaces. Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting...
Selemix 7-532/7-533 2K Polyurethane Direct Topcoat HS (30 GU)
Versatile, high solids 2-pack PU with 30% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-534/7-535 2K Polyurethane Direct Topcoat HS (50 GU)
Versatile, high solids 2-pack PU with 50% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-536/7-537 2K Polyurethane Direct Topcoat HS (70 GU)
Versatile, high solids 2-pack PU with 70% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 7-538/7-539 2K Polyurethane Direct Topcoat HS (80 GU)
Versatile, high solids 2-pack PU with 80% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys and GRP Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+...
Selemix 8-110/8-111 2K WB Acrylic Single Stage DTM Finish
2K waterborne, acrylic coating, with 6,700+ colours for direct application to well-prepared steel, galvanized steel, phosphate steel, or aluminium surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here. Excellent...
|
Selemix 4-0015/4-0090 2K Acrylic Clearcoat
High-performance 2K acrylic polyurethane clearcoat, in Matt or High Gloss, designed to provide high scratch resistance, weathering resistance and gloss retention. Designed to be applied directly over Selemix 7-53x 2K Direct Topcoats without any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried Product can...
|
Selemix 6-570 Anti-Foam Additive
An additive which can be added to Selemix 2K Polyurethane or Acrylic Topcoats in order to help eliminate foaming during application. Foaming can result from high pressure spray application (airless or air-assisted airless spray), which can cause pinholes and a loss of gloss in the final finish For Professional Use Only More Information...
Selemix 6-530 1K Synthetic Driers
Drier additive for Selemix 7-610, 7-611 and 7-630 Synthetic topcoats (added in colour mix*). For Professional Use Only Drier for 1K Synthetic Binder *Please note: This product must be added to the relevant topcoat at the colour mix stage - please contact our Technical Department before placing an order on 0113 2455450 (option 2) or send...
Selemix 6-540 Hammer Effect Additive
A silicone additive for Selemix solventborne cellulose, polyurethane and fast dry synthetic topcoats to achieve attractive Hammer Effect finishes. For use with: Selemix 7-610 and 7-611 Fast Dry Synthetic Topcoats Selemix 1K Cellulose Topcoats 7-510 Polyurethane Topcoat Selemix Direct Pro High Gloss (first coat must be sprayed without...
Selemix 6-549 1K Synthetic Extra Fast Driers
Drier additive for Selemix 7-649 1K Extra Fast Dry Topcoat (added in colour mix*). Drier for 1K Extra Fast Drying Synthetic Binder For Professional Use Only *Please note: This product must be added to the relevant topcoat at the colour mix stage - please contact our Technical Department before placing an order on 0113 2455450 (option 2)...
Selemix 6-560/6-561 Texture Powder Additives
Fine and coarse polyethylene powder paint additives. Creates a uniform finely textured surface with good abrasion resistance. Compatible with all Selemix System 1K and 2K topcoats without any impact on colour and on drying process They are also compatible with Selemix 8-110/1 Waterborne Topcoats For Industrial Use Only Please note: The...
Selemix 6-580 Brushing Additive
An additive which can be added to Selemix 1K Synthetic Primers and Topcoats in order to improve the brushing capabilities. The additive extends the open time and gives more flow to help eliminate brush marks. It can be used in Selemix 7-610, 7-611, and 7-630 Topcoats, and 7-810 and 7-820 Primers. For Industrial Use Only More Information...
Selemix 9-075 Direct HS Hardener
High solids hardener for use with Selemix 2K Polyurethane Direct Topcoat and Selemix 2K Polyurethane UHS Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 9-070 Direct Hardener
For use with selected products within the Selemix range including Selemix 2K Polyurethane Direct Topcoat and Selemix 2K Polyurethane Extra Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 9-080 Hardener For Acrylic
For use with selected products within the Selemix range including Selemix 2K Polyurethane Direct Topcoat, Selemix 7-110 2k Acrylic Topcoat and Selemix 2K Polyurethane Extra Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information...
Selemix 9-065 Slow Hardener
For use with selected 2K Polyurethane products within the Selemix range. Slower curing for polyurethane on large surfaces Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 9-060 Extra PU Hardener
For use with selected 2K Polyurethane products within the Selemix range. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 9-120 UHS Fast Hardener For Acrylic
For use with selected 2K products within the Selemix range including Selemix 7-120 2K Acrylic UHS Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-490 Accelerated Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-208 Slow Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-430 Acrylic Thinner
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-420 Polyurethane Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 1-159 Reactive Thinner For Acrylic
For use with selected products in the Selemix range including Selemix 7-159 Direct Pro High Gloss. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info
Selemix 6-585 Glass Adhesion Promoter
Additive for use with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU) for direct application to glass where the reverse side of the glass is painted. Examples are kitchen splashbacks, bathroom fittings, and advertising displays Please see the Product Data Sheet and the Product Data Sheet for the Base Product for mixing...
Selemix 6-549 1K Synthetic Extra Fast Driers
Drier additive for Selemix 7-649 1K Extra Fast Dry Topcoat (added in colour mix*). Drier for 1K Extra Fast Drying Synthetic Binder For Professional Use Only *Please note: This product must be added to the relevant topcoat at the colour mix stage - please contact our Technical Department before placing an order on 0113 2455450 (option 2)...
Selemix 6-530 1K Synthetic Driers
Drier additive for Selemix 7-610, 7-611 and 7-630 Synthetic topcoats (added in colour mix*). For Professional Use Only Drier for 1K Synthetic Binder *Please note: This product must be added to the relevant topcoat at the colour mix stage - please contact our Technical Department before placing an order on 0113 2455450 (option 2) or send...
Selemix 6-550 Direct Accelerator
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Accelerator to give faster cure times with Selemix Direct to Metal Topcoats Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information...
|
