Quickcure 700 is an additive added to Ultraflex to add several properties to facilitate its application in one layer, improve their physical and mechanical properties, and shorten the drying time.
Allows the application of Ultraflex in one layer at a desired thickness (e.g. 2mm). Avoiding the application of several layers with intermediate drying times
Eliminates bubbles and other defects in the membrane of Ultraflex applied in one layer
Reduces drying time from 24 hours to 3 hours
Note: Quick-Cure must be mixed at the EXACT RATIO of 1ltr for 15kg
Allows the application of Ultraflex in one layer at a desired thickness (e.g. 2mm). Avoiding the application of several layers with intermediate drying times
Elimination of bubbles and other defects in the membrane of Ultraflex applied in one layer
Increases the solid membrane's tensile strength
Pot-life time of the mix is around 90 minutes
Reduces drying and curing times on polyurethane membrane Ultraflex, especially in winter, cold weather, low humidity
Reduces drying time from 24 hours to 3 hours
Suitable for the application of polyurethane membranes in low-temperature conditions or adverse weather conditions
Application
Note: Please see the Product Data Sheet of the base product for full application instructions
Must be mixed at the exact ratio, 1 x full tin of Quickcure 700 to 1 x full tin of Ultraflex, otherwise the membrane will not form in the appropriate conditions of use. During the mixing, use mechanical equipment at medium speed to avoid the inclusion of air bubbles inside
Use one metal tin of 2l. (1.7 kg) to 25kg Ultraflex, and one metal tin of 1,2l.(1 kg) to 15 kg Ultraflex
Shake product before use
Incorporate Quickcure 700 into the polyurethane membrane Ultraflex metal tin, wait for 3-4 minutes, and homogenize with an electric/mechanical mixer to avoid air entrainment, and wait for 3-4 minutes
Pour the material on the surface, sharing with a notched trowel to get the desired thickness (You can also do this with roll or rubber lip)
Cures in 3 hours @ 23ºC
Do not use any kind of spray machine, to apply polyurethane membrane Ultraflex when mixed with Quickcure 700
In high ambient temperatures mix on a low speed in order to not increase the speed of chemical reaction and maintain the pot life
Clean with solvent after use
Product Details
8980-938127
Data sheet
Manufacturer
Eagle
For Use By
Consumer Use
Application Method
Pour
VOC Levels
400 - 405 g/l
Single, Two or Three Pack
Single
Pack Size
2L, 1,2L
Mixing Ratio
1:0,068(weight) / 1:0,080(volume)
Coverage
1 x full tin of Quickcure 700 to 1 x full tin of Ultraflex
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Eagle Ultraflex Quickcure 700 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A high-performance, waterproofing system that can be used all year round on new and existing roofs, walkways, balconies, gutters, etc, with excellent adhesion to a variety of substrates, forming a seamless membrane that is fully cured and trafficable after 24 hours.Ready to use straight out of the tin - application with a solvent resistant...