Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistency for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 191 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Rust-Oleum Thinner 191 is a specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 191 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Please read all relevant data sheets on this thinner and the coating you are intending to use it with to check for compatibility, volume ratios and application suggestions. If you are unsure please contact our Technical Team on 0113 2455450.
For a guide to some of the products diluted by this thinner see below:
Jotun Thinner No. 2 is a paint thinner designed to improve the flow of a range of Jotun alkyd and oil based based products. It can also be used as cleaner of pumps and tools after and before painting.
A special thinner for Rust-Oleum CombiColor 7300/7302 Hammertone. Although thinning of Hammertone is not necessary for spraying, if required it is advised to use this thinner. Also ideal for cleaning/degreasing of surfaces.
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
Carboline Thinner 214 is a thinner for use in industrial coatings.
Sherwin-Williams Cleanser/Thinner No.50 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of 'spots' of acrylic paints and acrylic fixing paints (e.g. on glass). Used to dilute Primer 44 HS, Fassiclor, Galvaprim and Vernac.
Carboline Thinner 33 is a thinner for use in industrial coatings.
Sherwin-Williams Cleanser/Thinner No.4 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 641 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...
Bradite TB34 Line Marking Paint Thinner is a low flash point solvent to thin etching primers, select chlorinated rubber paints and for equipment cleaning. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems. Key Properties Density: 0.81 kg/L Flash Point: -4°C VOC: 806 g/L Type: Line...
Carboline Thinner 215 is a thinner for use in industrial coatings.
Carboline Thinner 21 is a thinner for use in industrial coatings.
Nullifire FC015 Thinner can be used with compatible Nullifire primers, basecoats and topcoats.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner RL can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes,...
