Sherwin-Williams Degreaser W500

W500

Sherwin-Williams Degreaser W500, formerly known as Envirogard W500, is a water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or aggressive biocides. Degreaser W500 is suitable for removal of dirt, oil and grease from all ferrous and non-ferrous metallic substrates, including galvanised steel. 

Size
£42.03
VAT excluded

£50.44 Tax incl.
Quantity

Description

Sherwin-Williams Degreaser W500, formerly known as Envirogard W500, is a water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or aggressive biocides. Degreaser W500 is suitable for removal of dirt, oil and grease from all ferrous and non-ferrous metallic substrates, including galvanised steel.

Recommended Application Methods

For manual application methods dilute 1 part Degreaser W500 in 5 to 20 parts warm water, apply to surface by brush, sponge or clean cloth. Wipe over surface and rinse with clean water, leaveto dry as necessary.

For pressure washers, use at 1 part with 10 to 50 parts water, depending upon amount of contaminant to be removed. Use medium or high pressure. Hot or cold water may be used, heavy fats oils and greases are best treated with water at 60°C or higher temperature.

For heavily contaminated surfaces, manual cleaning is recom- mended. When removing hydrocarbons, the water should be collected and circulated through an oil separator and sand filter before being discharged to a waste water treatment plant or further filtered and re-used. 

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
W500
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send