Jotun Chemflake CV
We no longer stock this product; we have some recommended alternatives as listed below but due to the specialist nature of these coatings, please contact our technical team prior to purchase/use on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your project.
Jotun Chemflake CV is a glass flake reinforced conductive unsaturated vinyl ester coating. It is an ultra high build, chemical resistant and fast curing barrier coating that can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.
Jotun Chemflake CV is recommended as an internal lining for onshore and buried tanks where a conductive coating is required. Ideal for areas subject to extreme chemical exposure and mechanical wear and where future maintenance is challenging.
IMPORTANT: Jotun additives MUST be bought with this product to ensure drying and correct use. Please refer to the product Technical Data Sheet for information on which additives and how much of each are required. If in doubt, please contact our Technical Department on 0113 2455450.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- For Use On
- Application Method
- Semi Gloss
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- 1.4 to 1.6m²/l
- Touch Dry
- 4 hours
Be the first to ask a question about this product!