Remmers Color LA (formerly Silicone Paint LA) is a pigmented silicone resin emulsion paint coating containing a film preservative to protect surfaces at risk of infestation with algae or fungi. Water repellent w ≤ 0.1 kg/(m² h) 0.5 Highly water vapour diffusion capable sd ≤ 0.05 m Does not inhibit carbonation Low-stress Matt, mineral...
Remmers Primer H (Impregnation Primer)
Remmers Primer H (formerly Impregnation Primer) is a primer with hydrophobic effect for water repellent priming of mineral building materials subsequently coated with Remmers Color LA, Remmers Color PA and other synthetic resin bound coating systems.
- Equalises absorption capacity
- Contains solvents
- High penetration capacity
Remmers Primer H (formerly Impregnation Primer) is a reactive, oligomer siloxane solution for water repellent priming of mineral building materials subsequently coated with Remmers Silicone Resin Paint LA, Concrete Acrylic and other synthetic resin bound coating systems.
Remmers Primer H is distinguished by high alkali resistance, i.e. the substrate to be primed may show a pH value of up to 14 without negatively influencing the effect of the primer. Because of its low molecular structure in the packaged state, Remmers Primer H has very good penetration capacity. Furthermore, a well-functioning primer protects the coating of paint against the penetration of moisture and noxious substances dissolved in the moisture.
The adhesion of the coating system to the substrate is improved and soil deposits, especially in hair cracks, are prevented. Moisture does not penetrate since in longer periods of alternating loads (rain, evaporation), the evaporation rate is higher than the amount of moisture absorbed. After application, the effective ingredient is deposited on the capillary and pore walls as a macromolecular layer without noticeably influencing the water vapour diffusion capacity of the primed building material.
To be used as an impregnation primer for mineral, sound substrates. Remmers Primer H should not be used on synthetic resin or dispersion based old coatings (swelling, blistering) or on bonded heat insulation systems. The product cannot be mixed with water.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 24 hrs
- 0.2 - 0.4L per m²
- Recommended Thinner/Cleaner
- Remmers Thinner V101
- Max. Application Temperature
- 25 °C
- Min. Application Temperature
- 5 °C
- 0.8 g/cm³
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
Be the first to ask a question about this product!
Remmers Color PA (formerly Concrete Acrylic), particularly when combined with Remmers Primer H, meets the requirements for use as a CO2 inhibiting and water repelling protective coating for renovation and repair measures on concrete surfaces. Weather resistant Very good hiding power Colour stable Easy to apply Available in 150+ RAL...