Quelfire Accessories
Accessories for use with Quelfire fire stopping products and systems.More Information Delivery Info
£4.16 (incl. VAT)
£3.47 (ex. VAT)
QuelStop Intumescent HPE Graphite Sealant is a high expansion intumescent acrylic based graphite sealant used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services as part of the QuelStop Fire Batt System or direct to the substrate. Up to 4 hours fire rating (EI240).
May be used for sealing around services such as cable, cable bundles, trays, ladders, combustible pipes, combustible insulations, either as part of a seal directly within the wall or floor substrate.
QuelStop CE Marked HPE Graphite Sealant can also be used as a linear joint seal in which cases, a mineral wool or PE backing rod, can be used as a backing material to ensure the correct depth of QuelStop CE Marked HPE Graphite Sealant is applied in order to achieve the required performance.
All surfaces must be clean and free of any bond breaking contamination prior to application of the sealant.
The sealant should not be applied if the ambient temperature is below 5°C or above 40°C, as the adhesion may be impaired.
The QuelStop Intumescent HPE Graphite Sealant should be installed to the correct annulus and depth which depends on the penetrating services / material specification. The total annular space should be filled with compacted QuelStop HPE Sealant which is applied through the use of a standard sealant gun and once applied should be lightly compacted and smoothed off with a spatula to produce a professional and neat finish.
For full details on application and installation, refer to all available documentation and installation details in the data sheets tab further above, for:
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Quelfire QuelStop Intumescent HPE Graphite Sealant is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Accessories for use with Quelfire fire stopping products and systems.More Information Delivery Info
£4.16 (incl. VAT)
£3.47 (ex. VAT)