Protecta FR Adhesive contains a water based inorganic polymer and filler, and is designed to withstand temperatures greater than 1,200 °C. It is supplied as a ready to use thixotropic paste which exhibits excellent early grab and rapid bond strength.
After curing the product forms a cement with a permanent bond giving excellent adhesion in service.
Protecta FR Adhesive can be used both as an adhesive and as a filler, with multiple usages where bonding or sealing very hot surfaces is required, or sustaining a seal or a bond within a fire situation without detachment.
Ideal for bonding mineral fibre boards to steel, timber and concrete, adding an extra layer of protection against heat transfer
Ideal for sealing joints on stoves, flues, grates and central heating boilers
Ideal for sealing annular gaps on high surface temperature pipes
Ideal for sealing and repairing small cracks and holes in car exhausts systems - stops noise and gas emission leaks
Suitable for most surfaces, including stone, brick, concrete, cement, plaster, timber, metals, stone wool, glass, paper, vitreous and ceramic surfaces and all inorganic materials (on plastics and painted surfaces, adhesion should be tested)
Instant grab with no need for additional support (under correct applications)
High bond strength when cured
Seals and repairs systems in situ
Prevents escape of dangerous exhaust fumes from joints and repairs
Ready to use and easy to apply
Fast setting - air cures to a hard finish especially when heated, tack free in approx. 1 hour, good bond in 4 hours and full cure in 48 hours
Slump resistant
Shock and vibration resistant during service
No priming necessary for application to most materials
The fire performance specification of a bond has been derived when the adhesive has been let to cure for only 24 hours
Product is practically odourless and VOC free
Alkaline - does not attack acid sensitive substrates
12 months storage time (under correct conditions)
30 years working life (under correct conditions)
Limitations
Not intended for application on substrates that can exude certain oils and plasticizers or solvents
Not suitable for food contact or medical applications
Cannot be subject to sub-zero temperatures before setting (48 hours)
Cannot be subjected directly to water or moisture
Application
Please refer to the data sheet for more information, including:
Test Standards & Observations
General Application Instructions
Additional Instructions Bonding Mineral Fibres
Emission Data (indoor air quality)
Technical data
Resistance to Fire (as an adhesive)
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
7919-910364
Data sheet
Manufacturer
Protecta
For Use By
Professional Use
Interior / Exterior Use
Interior Use
Water / Solvent Based
Water
For Use On
stone, brick, concrete, cement, plaster, timber, metals, stone wool, glass, paper, vitreous and ceramic surfaces and all inorganic materials (on plastics and painted surfaces, adhesion should be tested)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Protecta FR Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Protecta FR Board, designed to prevent the spread of fire & smoke through openings in fire rated walls & floors with multiple installed building services. Permanently flexible, it will maintain the acoustic design performance in fire rated walls & floors, accommodating movements during fire & smaller movements in the...