A 2-component polyamide cured epoxy high build non-skid coating for steel decks and concrete in severely corrosive environments and/or subject to mechanical wear.
Forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and related products
Cures at temperatures down to -10°C - service temperature up to 140°C
Conforms to DEF STAN 80-134 Type 1 deck coating (wear and non-slip)
Not recommended for mineral acids or strong oxidizing solutions
Hempel Non-Skid 45340 is a two-component polyamide cured epoxy high build coating, it forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and related products. Limited resistance to vegetable oils and to strong solvents such as ketones, esters etc. Not recommended for mineral acids or strong oxidizing solutions.
Features & Benefits
For professional use only
Not recommended for mineral acids or strong oxidizing solutions
Cures at temperatures down to -10°C
Non-skid coating on steel decks and concrete in severely corrosive environments and/or subject to mechanical wear
Service temperature up to 140°C
Conforms to DEF STAN 80-134 Type 1 deck coating (wear and non-slip)
Apply with roller/brush or hopper gun. Nozzle orifice 5mm, nozzle pressure 4-5 bar [58-72.5 psi]
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hempel Non-Skid 45340 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the productMore Information Delivery Info
Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C.Maintenance and repair primer, intermediate, and/or finishing coat in Hempadur systems in severely corrosive environment, and many more uses below EC-type examined as a low...
Hempadur 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.For professional use only Blast primer for heavy duty epoxy systems on submerged and non-submerged areas according to specification Air or airless spray application, for new builds, maintenence and repairMore Information...
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature.Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products....
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...