Teamac High Performance Polyurethane Topcoat (previously known as Teamac P101 High Performance Finish and Teamac High Performance Marine Gloss) is an aliphatic, 2 pack polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ultra violet light.
Internal and external use on floors, walls, and structures
Suitable for marine environments
Protects against chemicals, graffiti, high traffic levels, and fungal growth
Will not fade or yellow when exposed to high levels of ultra violet light
Available in 2,500+ coloursfrom RAL, BS NCS and the new NCS 2050 colours
Teamac High Performance Polyurethane Topcoat (previously known as Teamac P101 High Performance Finish and Teamac High Performance Marine Gloss) is an aliphatic, 2 pack polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ultra violet light. It is used as a coating that will not support fungus growth and is easily cleaned of surface contaminants. Ideal for marine applications on GRP, wood, ferro concrete and suitably primed metals. It can be used over compatible water based paints but is not recommended for use over conventional single pack solvent based paints.
Will not fade or yellow when exposed to high levels of ultra violet light
Internal and external use on floors, walls, and structures
Suitable for marine environments
Protects against chemicals, graffiti, high traffic levels, and fungal growth
Available in 2,500+ coloursfrom RAL, BS NCS and the new NCS 2050 colours
Product Specification
Technical Data
Volume Solids
47%
VOC Content
Max 498 g/litre
SG
1.07 @ 20°C
Viscostity
N/A
Flash Point
40°C (closed cup)
Film Thickness Range And Coverage
Product Data
Dry Film Thickness
Wet Film Thickness
Theoretical Coverage
Maximum
55 to 65 µm
120 to 135 µm
7.5 to 8.5 m2/litre @ 75 microns D.F.T
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
3 - 4 hours
Dry To Handle:
16 - 24 hours
Dry To Recoat:
16 hours
Fully Cured:
5 - 7 days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Pot Life
6 to 8 hours @ 20°C
Once the parts are mixed together the material has to be used within the time stated.
Surface Preparation
All surfaces should be laitance free, clean, dry, sound and free from contaminants.
Preceeding Coat
Prime porous ferro concrete surfaces with, CooVar High Performance Primer. Metal surfaces should be suitably primed. (Teamac Etch Primer for aluminium, Teamac Epidox 2 Zinc Phosphate Primer for steel.)
Mixing
The product is supplied in two containers: one larger than the other and labelled Base. The other smaller one labelled Hardener. The contents of the pack marked Hardener are added to the contents of the larger pack marked Base and thoroughly mixed together, preferably by slow speed electric mixer for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.
Application Conditions
Apply between 5 to 30°C by brush or short nap mohair roller.
This product can also be spray applied in approved conditions.
When brush or roller applied at ambient temperatures - these products do not emit free Isocyanate at above levels recommended by C.O.S.H.H. Regulations. However, the protective measures shown on the product labels and safety data sheets must be followed.
When used at elevated temperatures or atomised (sprayed) these products do emit small amounts of free Isocyanate and should only be sprayed in an atmosphere controlled working area, with suitable ventilation or flame proof extraction of air. Operatives must wear suitable protective clothing and separate air fed breathing apparatus.
It is recommended that spraying of these products be avoided wherever possible to facilitate uncomplicated application and site conditions.
Application Methods
Method
Airless Spray
Conventional Spray
Brush
Roller
Yes
No
Yes
Yes
Thinner (Max vol): Do not thin
Nozzle Size: N/A"
Nozzle Pressure:1800 to 2000 psi
Cleaning Solvent Anti-Graffiti Brushwash
Health & Safety
For clear hardener see safety data sheet - SDS 10866, for base see safety data sheet - SDS 10867. For all colours hardener see safety data sheet - SDS 10973, for base see safety data sheet - SDS 10972.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi, would like to use your marine 2 part paint on my hull which has I assume standard marine enamel paint on it. Can this be primed and by what to enable me to use P101.
Answer from Rawlins’ Technical Team:
We would not recommend application of this product over a single pack enamel paint, this should be removed prior to application and an appropriate primer maybe required.
Hi, I’m considering using this product to coat nylon fabric on a skin -on-frame kayak. Required to be abrasion resistant, UV resistant and flexible. Any past experience or comments?
Answer from Rawlins’ Technical Team:
This product would not be suitable for this application unfortunately.
Richard Mortlock on 2018-11-25 15:29:05
Question:
Can this product be used to seal crazed gelcoat on a dinghy deck ? Will it penetrate and bind to the grp substrate ? Is a primer needed ? The cracks are not hairline but are not wide. They are too extensive to consider re gelcoating. Thank you.
Answer from Rawlins’ Technical Team:
Assuming the crazing is not deeper than 1mm, we have customers that have success with the following system. If crazing is deeper than 1mm then you would need to re-gelcoat.
Thoroughly clean all surfaces and apply Teamac 2 Pack Zinc Phosphate Primer to the crazes and allow to dry overnight. Sand, then clean down and apply a further coat of Teamac 2 Pack Zinc Phosphate Primer, sand again once dry and then apply 2 coats to all areas of Teamac P101 High Performance Finish in the desired colour.
Teamac 2 Pack Zinc Phosphate Primer, is a two pack, high performing epoxy zinc phosphate primer for application to steel which is clean and free from scale and/or rust.
For application to blast cleaned and other suitably prepared steel surfaces
Dry to recoat in as little as 2 - 4 hours
Up to 12 square metres per litre coverage
Not...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
steve field on 2022-06-11 08:59:03
