Smartkote Protectakote UVR Accelerator is a liquid second component which may be added to ProtectaKote UVR if desired to increase the rate at which the product cures at low temperatures or humidity. Protefctakote UVR Accelerator is not intended for use at normal room temperatures.
Rust-Oleum 400 Ultra Wear Additive
Rust-Oleum Ultra-Wear 400 increases the wear resistance of floor coatings, and is a special additive based on aluminium oxide to enhance the abrasion resistance and traction of floor coatings.
For use with 2-component floor coatings to achieve a greater durability and a non-skid surface. Rust-Oleum Ultra-Wear 400 is a special additive based on aluminium oxide to enhance the abrasion resistance and traction of floor coatings.
Mix Rust-Oleum Ultra-Wear 400 before application with a floor coating in order to improve the abrasion resistance. For a full list of floor paints that this product can be used with please see the Technical Data Sheet.
Features & Benefits
- Available in 750 grams packing
- Mix one package with 5 litre floor coating
- Always apply the mixed product by roller or brush NOT spray
Be the first to ask a question about this product!
Remmers Artico Color is a highly filled pigment paste for pigmenting synthetic resins, e.g. Remmers PUR Top Plus. Used for producing coloured, slip-retarding floor coating sealants in interior areas.
Remmers Floormix DQ Aggregate is a special blend of graded decorative colour quartz aggregate for the production of epoxy mortar screeds. Can be laid at 3 - 4mm and available in a wide range of colour blends. Blend with any of the Remmers epoxy resins as a binder.
Remmers Ceramix 03 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Image already added
International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131) 0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).
Remmers WHG TX is a thixotroping agent for solvent-free, Remmers epoxy resin floor coatings. It is used to produce compounds in a filling consistence for rising building elements such as face sides, hollow coves, plinth upstands and stair steps. Image already added
Sika Reemat Premium is a glass fibre reinforcement mat for use in conjunction with various Sika systems to provide increased system strength, crack bridging and longevity. Refer to the relevant Sika system/product data sheets for specfic details on application, consumption, etc.
Remmers Ceramix 07 is a mixture of coloured quartz with a special aggregate grading curve for coloured blinded floor covers used as blinding material for slip-resistant coverings and for the production of mortars and screed mixes. Coloured quartz sand with grain size of approx. 0,2 - 0,7 mm, e.g. for use as aggregate for Remmers decorative pebble...
Sikafloor Comfort Regupol 6015H is a rubber shockpad that is part of the Sika ComfortFloor Pro system. Sikafloor Comfort Regupol 6015H is a prefabricated rubber shockpad produced by bonding rubber crump with a polyurethane compound.
A hard silica quartz aggregate is an additive that conforms with parts KU1 C/D and KF1 E/F of BS5493, providing additional under foot traction to floor coatings. Advantages Helps to prevent accidents on wet floor areas Stir directly into paint Cream in colour ISO 9001:2008 & ISO 14001:2004
Sika PU Accelerator is a catalyst designed to increase the cure rate of Sikalastic products and Sikafloor products to facilitate a faster application and reduce downtime in areas where a rapid return to service is required.
To be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.
Remmers Floormix Aggregate is a special grade of colour quartz aggregate for the production of epoxy mortar screeds. One primary colour with black and white flecks to achieve an attractive easy to apply decorative resin mortar. Blend with any of Remmers clear epoxy resins as a binder. Ideal for workshops, food production areas, wet areas, police cells,...
Remmers Ceramix 20/30 is a coloured quartz sand with a grain size of approx. 2 - 3mm producing a decorative mixture of aggregates for coloured quartz floorings, e.g. decorative pebble covers or stone imitation covers. Image already added
Coo-Var Profloor Plus Anti-Slip Aggregate is ground mineral powder of specific particle size (0.54 – 0.71mm) to be used to create an anti-slip element to Coo-Var Profloor Plus, Profloor Plus FH and Coo-Var Profloor Plus Cold Cure 2 Pack Epoxy Floor Paints.