Remmers WHG TX
Remmers WHG TX is a thixotroping agent for solvent-free, Remmers epoxy resin floor coatings. It is used to produce compounds in a filling consistence for rising building elements such as face sides, hollow coves, plinth upstands and stair steps.
- High stability
- For professional use only
- Long shelf life if stored dry
**Available for delivery - see Delivery Options below**
Remmers WHG TX is a thixotroping and set-up agent for synthetic resins; component in the SL Floor WHG / WHG AS system. Remmers WHG TX is used to produce compounds in a filling consistence for rising building elements such as face sides, hollow coves, plinth upstands and stair steps.
Depending on the desired consistence and the application area, approx. 2% by weight related to the binder.
Add according to the desired material properties of the A component and mix vigorously. Add a further quantity if necessary after adding the B component and mixing again.
For professional use only. Use, degree of filling and working directions are determined by the specific application and the resin/hardener system used.
The amount of thixotropic agent used depends on the temperature of the material and air, and the method of incorporation. Thixotropising influences the material properties. Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
For professional use only. Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.
- Single, Two or Three Pack
- Pack Size
- Approx. 2% by mass
- Shelf Life (from date of manufacture)
- Unlimited if stored dry
- UN Number
Be the first to ask a question about this product!