RSL Epo-Flex VJ (formerly known as Resujoint V) is a high performance flexiblilized two component epoxy joint sealant. It is a thixotropic compound which is designed to accommodate low level movement in vertical as well as horizontal joints.
RSL Epo-Flex VJ (formerly known as Resujoint V) is ideal for stable expansion jointing in self-smoothing and screed floor coating systems. It offers high performance on a large range of screed systems.
For more colour options, please ring our technical team.
Remove all laitance, old mastic and other filler media by cutting or grinding. Ensure the joint is clean, dry, sound and free from dust. The joint should be formed to the correct depth/profile by placing a bond breaker or debonding film at the base of the joint, to form a uniform cross section with a minimum depth of 6mm and width to depth aspect ratio of 2:1 to 1:1. Where high loads are to be applied then a minimum depth of 10mm should be used.
Prime the walls of the joint with Resuprime NT or Resuprime MVT by brush, ensuring all the sides and base are covered with the primer.
Mixing: Pre-mix the coloured base component to a uniform consistency then add the entire contents of the hardener to the base. Mix thoroughly, using a slow speed electric mixer for approximately two minutes until the two components have fully combined.
The mixed unit should be applied immediately by trowel, spreading knife or spatula to fill the joints and smooth the surface.
For joints over 10mm wide, a firm backing should be used. Ensure that all joint fillers are well compacted. It is important to ensure that the backing stop/bond breaker is tight fitting in the joint to retain the Epo-Flex VJ in the correct position.
Care should be taken when placing the backing strip to ensure that it is not stretched on installation, as this can result in leakage at the ends of the joint/strip as it shrinks back.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
RSL Epo-Flex VJ is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on...
£176.52 (incl. VAT)
£147.10 (ex. VAT)
