A problem solving coating for damp walls developed by Rust-Oleum. The paint is specially formulated to adhere and build a strong bond with the damp surface it is applied to, because it contains cement the moisture on the substrate actually helps the paint cure and become stronger coating.
SikaProof A Membrane Edges
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures against ground water ingress.
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections.
Damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures against ground water ingress:
- Below ground concrete slabs
- Below ground walls with both single and double -faced formwork
- Extensions and reconstruction works
- For prefabricated constructions
Features & Benefits
- Cold-applied (no pre-heating or open flames) and pre-applied, before the reinforcement is fixed and the concrete is poured
- Fully and permanently bonded to the concrete structure
- No lateral water underflow or migration between the concrete structure and the membrane system
- High watertightness tested according various standards
- Easy to install with fully adhered joints (no welding required)
- Weathering resistant with temporary UV-stability
- Resistant to ageing
- High flexibility and crack-bridging ability
- Resistant to aggressive mediums in natural ground water and soil
Can be combined with other approved Sika waterproofing systems including:
- Sikaplan® WT membranes, FPO-based sheet waterproofing membranes
- Sikadur-Combiflex SG system, FPO-based joint sealing system
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Rust-Oleum 5090 Anti-Condensation Paint is a water absorbing coating to be used on ceilings and the upper parts of walls, where steam or water vapour formation occurs, in order to prevent condensation and dripping. It is intended as a one coat, airless application, but a more textured finish can be obtained by applying 2-3 coats.
A waterproofing paint that is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years. This waterproof masonry paint can easily be applied to wet or dry surfaces creating a smooth, non-gritty finish.
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...
Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.
Thermilate InsOpaint Anti-Condensation Paint is a premium quality acrylic paint with very low odour levels and maximum thermal insulation performance that is perfect for all interior walls and ceilings and provides a U-value improvement of 0.25 W/m2K. Fights condensation problems including mould, blistering paint, discolouration, staining and peeling...
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant, resin-based paint for application to damp interior walls and ceilings. Designed as a primer coat. ADVANTAGES Combines with surface moisture and dampness Preserves dry film Reduces discolouration Can be applied to surfaces still slightly damp Can be...
Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation. ADVANTAGES Prevents the formation of condensation Inhibits unsightly mould growth Can be a finish or coated with emulsion or acrylic Interior use Biocide reduces discolouration
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
SikaProof A05, SikaProof A08 and SikaProof A12 are fully and permanently bonded, self-adhesive, composite sheet membrane waterproofing systems for reinforced concrete of the main structure. It consists of an embossed polyolefin (FPO) membrane laminated with a sealant grid and a non-woven fleece. Damp-proofing, concrete protection and waterproofing for...