The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane used for internal fixing to masonry, stone or concrete walls, dry lined walls, and as a floor membrane where limited water passage is anticipated. Provides a fast track waterproofing solution for walls or floors, suitable for use above and below ground, impermeable to water, gas...
Mathys Pegaprim Sanitop
Mathys Pegaprim Sanitop is an interior and exterior wall and ceiling paint based on water-based acrylic resins with excellent covering power.
Mathys Pegaprim Sanitop is an interior and exterior wall and ceiling paint based on water-based acrylic resins with excellent covering power. Pegaprim Sanitop’s dry film protects against fungal degradation and is therefore the ideal finish for damp areas. Pegaprim Sanitop is a high quality satin matt primer and topcoat in one for the interior coating of humid sensitive areas where fungal degradation is possible such as bathrooms, kitchens, basements, wood, exterior walls, inside of verandas, washing areas, poolhouses. It can also be used as a durable exterior masonry coating. Pegaprim Sanitop has good adhesion to most common surfaces.
- Primer and topcoat in one
- Protection of the dry film against fungal degradation
- For inner and outer use
- High quality satin mat finish
- Excellent adhesion
- Ideal for damp areas
- Fast drying
- Typical Coverage (per coat)
- 7-10m² per litre
- Touch Dry
- 40 Mins
- Brush, Roller, Spray
Be the first to ask a question about this product!
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant, resin-based paint for application to damp interior walls and ceilings. Designed as a primer coat. ADVANTAGES Combines with surface moisture and dampness Preserves dry film Reduces discolouration Can be applied to surfaces still slightly damp Can be over-coated
SikaMur InjectoCream 100 is a new concept for the control of rising damp. It is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SikaMur InjectoCream 100 will diffuse within the damp wall to form a water repellent barrier...
Remmers Color SA plus is a high quality, interior wall paint with micro-silver as a film preservative against bacteria & mould. A high quality interior coating that is used in rooms that are at risk for mould or are already infested, e.g. in living rooms and bedrooms, hospitals, children's rooms, schools, kindergartens, offices, storage rooms, hotels,...
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane principally for use on floors, providing high water flow with a deep stud profile designed to resist blockages caused by lime deposits. Ideally suited by heavy duty use on floors, impermeable to water, gas and vapour, fast track installation, can be over-screeded...
The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations. Here you can find the associated accessories used with the Sika Cavity Drainage System.
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
The Sika CD Anti-Lime Coating is a blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Reduce “Free Lime” leaching from concrete surfaces, an effective Anti-lime coating to new concrete in Cavity Drain systems. Totally seals the...
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
An exterior paint which produces a tough, durable finish with up to 15 years performance, designed to resist cracking, fading, peeling and blistering. It contains a biocide to protect the dried coating against fungal degradation.
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in basements,...
Sika BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface. Sika BituSeal S-115 is designed for use as an underlayer in fully self-adhesive multi-ply...