A two component water based epoxy resin system pigmented with inorganic pigments and extenders. The adhesive is used to incorporate a fibreglass scrim giving much increased strength and flexibility.
Tor Aqualife TP Scrim Adhesive is a two component water based epoxy resin system pigmented with inorganic pigments and extenders. The adhesive is used to incorporate a fibreglass scrim giving much increased strength and flexibility. The system is completed by 2 coats of Torlife WB Gloss / Satin Finish.
Tor Aqualife TP Scrim Adhesive is part of a high performance anti graffiti system and an easy clean hygiene finish for the food and drink industries. To be used with Tor Glass Fibre Membrane as part of a system.
Bare Friable/Porous:
Glazed Tiles/Previous 2 Pack:
| Application | |
|---|---|
| Mix Ratio | 4:1 approximately (base : activator) by volume |
| Method of application | Preferred application is by medium pile roller (small areas can be brushed). After bedding the fibreglass into the EP160 a further coat of EP160 is applied overall to “fill in” the fibreglass profile. |
| Thinner | Not Required |
| Cleaner | Water (if allowed to dry use Tor TH98) |
| Pot Life | Approximately 1 hour |
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 2 hours | 16 hours | 16 hours | 28 days |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Store in a safe place out of the reach of children
Flash point
Shelf life
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Aqualife TP Scrim Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor Aqualife TP WSE Primer, an adhesion promoter for non-porous substrates such as ceramic tiles, engineering brick and aged anti-graffiti/hard glossy coatings.For non-porous substrates such as ceramic tiles, engineering brick and aged anti-graffiti/hard glossy coatings A barrier coat against bitumen or graffiti A primer for stripped...
£165.42 (incl. VAT)
£137.85 (ex. VAT)
Tor Torlife WB Satin Finish, a high performance water based anti-graffiti coating for use as the finish coats of the Torlife WB System. Provides a long life, easy cleaned permanent anti-graffiti system for public access areas with an extended redecoration cycle.Must only be applied to surfaces which have been primed with Aqualife WSE...
£217.26 (incl. VAT)
£181.05 (ex. VAT)
Tor Torlife WB Gloss Finish, a high performance water based anti-graffiti coating for use as the finish coats of the Torlife WB System. Provides a long life, easy cleaned permanent anti-graffiti system for public access areas with an extended redecoration cycle.Dries quickly to provide an extremely tough finish with outstanding colour...
£217.26 (incl. VAT)
£181.05 (ex. VAT)
A fibreglass scrim giving much increased strength and flexibility when used as part of a system with Tor Aqualife TP Scrim Adhesive.Supplied in 1m x 100m packs To be used with Tor Aqualife TP Scrim Adhesive as part of a high performance anti graffiti system and an easy clean hygiene finish for the food and drink industriesMore...
£327.84 (incl. VAT)
£273.20 (ex. VAT)
