Alternatively you can email our sales & support team on [email protected]
Teamac Black Tar Varnish
460/Q555/2N/F
Teamac Black Tar Varnish, is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
Teamac Black Tar Varnish, is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
1.5 Hours
Dry To Handle:
4 Hours
Dry To Recoat:
8 hours or overnight
Fully Cured:
3 - 5 Days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants.
New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Preceeding Coat
N/A
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice.
In confined spaces, provide adequate ventilation during application and drying.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
460/Q555/2N/F
Data sheet
Parts
Single part pack
Key Features
Synthetic tar varnish. Weathered surface protection. Marine quality. Hard wearing
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.
Suitabe for use with Brush, Roller or Spray.
Can also be used for the cleaning of some surfaces prior to application of the coating.
Also for the cleaning of application tools such as...
Jotun Jotaguard 660 is a two component polyamine cured pure epoxy coating that is a fast drying, surface tolerant, very abrasion and impact resistant, high solids, high build product. Specially designed as a high performance coating for cargo holds it can be used as primer or finish coat in atmospheric and immersed environments.
Jotun Jotaguard 690 S is a two component polyamine cured pure epoxy coating that is a fast drying, high solids, high build product. It has excellent abrasion, impact and scratch resistant and is specially designed as a premium finish coat for cargo holds where extended repair intervals are required, even when operating with the toughest exposure.
Teamac Bilge Paint, provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 4 colours.
Advantages
Hardwearing and resilient
Single Pack formulation
Use on inner hull walls
Suitable for use on wood, metal and GRP
Click to jump down to...
Carboline Carboclean Gel 100 is a biologically degradable surface cleaner without any hazardous substances. Can be disposed to drains/sewage systems without containment.
Top Features
Removes rust, chalk, magnetite, salt, algae and other deposits.
Well-suited for treatment of ceilings, walls.
Works as a treatment of metals and...
PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 350+ colours from RAL and BS, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component and conventional coatings, even...
International Interlac 668 is a one pack, alkyd based, high visibility coating for application to marker buoys and as a safety marker on board ship. International Interlac 668 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.
International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating that will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Specifically designed to provide long term steel protection via brush or roller application techniques where the performance of Interzone 954 is required...
Teamac Deck Paint Smooth, is a conventional, durable, protective coating for wood and metal decks. It can be used on suitably prepared wood and metal decks as well as directly to GRP decks.
Advantages
Protective.
Good durability.
Suitable for wood, metal and GRP.
Click to jump down to Technical Data
Coverage Calculator
Jotun Jotaguard 630 is a two component polyamine cured epoxy coating that is a fast drying, surface tolerant, hard wearing, high solids, high build product. Specially designed for general use in cargo holds and can be used as primer or finish coat in atmospheric and immersed environments.
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
Jotun Marathon IQ GF is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. Suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly...
Jotun Jotaguard 690 is a two-component polyamine cured pure epoxy coating that is fast drying and has superb mechanical strength.
ADVANTAGES
Easy to clean
Long lasting
Reduced application costs
Impact/abrasion resistant
Less downtime
Certificated
Teamac Suregrip Deck Paint, is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry
Suitable for:
Foot traffic
Light truck traffic
Use on wood
Use on metal
Use on concrete
Use on GRP
Available in a range of colours
Click to jump down to Technical Data
Teamac Marine Matting Agent, is a matting additive that allows the sheen level of all colours of Teamac Marine Gloss to be customised.
Advantages
Allows Marine Gloss sheen levels to be customized.
Use to produce a range of finishes Matt, Eggshell, Satin & Semi-Gloss
Ideal for use where low glare is required such as boat roofs and...
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones.
Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.