Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating. This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
International Interzone 954BG
International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating that will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Specifically designed to provide long term steel protection via brush or roller application techniques where the performance of Interzone 954 is required but spray application is not possible.
International Interzone 954BG (Brush Grade) is a two component, low VOC, high solids, modified epoxy barrier coating specifically designed to provide long term steel protection via brush or roller application techniques. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.
- Primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
- International Interzone 954BG is intended for use in those instances where the performance of Interzone 954 is required but spray application is not possible.
- Colours for this product are approximate and not exact matches to the stated RAL and BS colours. White is comparable to BS 4800 10 B 15.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 4.4m² per litre
- Touch Dry
- 4 Hours
Be the first to ask a question about this product!
Jotun Hardtop Smart Pack is a two component chemically curing modified acrylic coating that does not contain isocyanates. It has a gloss finish with good gloss retention and can be used direct to metal. It has a 1:1 mixing ratio for easy use and reduced wastage and is specially designed for application with brush and roller.
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in a wide range of colours, including BS, RAL,...
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired.
Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming and primer/finish...
Carbomastic 25 gives a smooth and hard surface. The coating is very solid and provides excellent protections against corrosion. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation.
Teamac Metalastic Metal Protective Paint Colours , is high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours. Advantages Multi-surface Gloss finish Indoor or outdoor Economical protection...
HMG Chrome and Brass Lacquer. A water white, clear vinyl resin based coating, which has excellent abrasion, chemical and corrosion resistance. Thermoplastic and very flexible, exhibiting excellent resistance to attack by alkalis, mineral acids, alcohols, greases, oils or aliphatic hydrocarbons. Extremely good adhesion to chrome, brass...
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
Bradite Fastrac is a high performance direct-to-metal silicone/polyurethane alkyd finish. Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Available in more than 350 colours in RAL & BS...
A glass flake reinforced, abrasion resistant epoxy coating that is surface tolerant, fast drying, high solids and high build. Specially designed for areas where increased abrasion and impact resistance is needed such as decks, walkways and landing areas.
a single package, water-based, flexible mastic fire protective coating for cables and cable trays. Can be applied to electrical cables to retard fire propagation. Top Features Flexible Allows easy replacement of cables Asbestos-Free – complies with EPA and OSHA regulations Factory Mutual – tested and approved Does not de-rate cables
A high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. It is excellent for use in maintenance. Top Features Outstanding application properties Protects steel galvanically Cured film is tough and abrasion resistant Widely used within petrochemical,...
A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish
SikaCor 6630 High Solid is a versatile, high-build coating for steel and galvanizing, non-ferrous metals, plastic and timber. It is a low-solvent, oxidative drying high-build coating with active corrosion protection pigments based on modified synthetic resin combination. Features & Benefits Low solvent content, easy to apply and...
An aluminium-pigmented high solids mastic with excellent barrier and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading. Top Features Suitable as a topcoat for most tightly adhering existing coatings Contains 9 % aluminium by weight in the dry film Can be used as a...