One-pack modified silicon topcoats for painting Steel and Aluminium structures which are resistant to high temperatures of up to 600°C.
Please note: Colours shown are for illustrative purposes only
Selemix 2.776.0350/2.776.0600 1K High Temperature Topcoat - 1K modified silicon topcoats designed for the painting of metal structures which require a protective paint film that is resistant to high temperatures.
For interior use on Steel and Aluminium.
Heat resistance levels:
2.776.0600 - Black -resistance to 600°C - For Industrial Use Only
Apply only on a clean and dry surface with a temperature above 15°C. In confined spaces, provide adequate ventilation during application and drying.
For exterior use where corrosion resistance is required, please refer to our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.
Steel (Interior Use):
Aluminium (Interior Use):
| Conventional Spray | 2.776.0350 Silver | 2.776.0600 Black |
|---|---|---|
By Weight: 1K High Temperature Topcoat | By Weight: 1000 200-250 | By Weight: 1000 50-150 |
By Volume: 1K High Temperature Topcoat 1-610/1-215/1-205 Thinner | By Volume: 5 1.1.5 (20-30%) | By Volume: 10 0.5-1.5% (5-15%) |
| Viscosity (at 20°C): | 16-19 secs DIN4 | 19-29 secs DIN4 |
| Pot Life (at 20°C): | Unlimited | Unlimited |
| Air-Assisted Airless Spray | 2.776.0350 Silver | 2.776.0600 Black |
By Weight: 1K High Temperature Topcoat | By Weight: 1000 Use Unthinned | By Weight: 1000 Use Unthinned |
| Viscosity (at 20°C): | 25-30 secs DIN4 | 23-30 secs DIN4 |
| Pot Life (at 20°C): | Unlimited | Unlimited |
| Features | Conventional Spray | Airless Spray |
|---|---|---|
| Spraygun Setup: | Nozzle: Gravity: 1.3-1.4mm Suction: 1.6-1.8mm Pressure feed: 0.85-1.2mm | Nozzle: 9-11 thou 0.23-0.28mm |
| Air Pressure: | HVLP: 2 Bar Standard: 2-3 Bar | 2.5 Bar |
| Fluid Pressure: | N/A | 80-100 Bar |
| Number of coats: | 2 | 2 |
| Flash-off between coats: | 5-10 mins | 5-10 mins |
| Drying: | Air dry or bake 30 mins at 60°C | Air dry or bake 30 mins at 60°C |
| Wet Film Thickness: | 120 microns | 120 microns |
| Dry Film Thickness: | 25-50 microns | 25-50 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Note: Please see the Product Data Sheet for detailed information.
| Drying Times | |
|---|---|
| Dust Free | 20-30 mins |
| Touch Free | 1-2 hours |
| Tape Free | 2 hours |
| Handleable | 1-2 hours or 30 mins at 60°C |
| Hard Dry | 30-40 mins at 180°C |
| Overcoating time | Minimum: or 30 mins at 60°C Maximum: 2 hours with light sanding |
| Please Note: Lower temperature or film thickness higher than 50µm will extend drying times | |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Nick Durrant on 2023-07-11 14:02:31 | Question: RE: Selemix 2.776.0350/2.776.0600 1K High Temperature Topcoat Can this be sprayed onto bear metal or does it need a primer? What sheen level does this paint have in the 600-degree black.? Thank you. |
Answer from Rawlins’ Technical Team: This product can be applied directly to bare prepared aluminium or steel for internal use. The substrate should be cleaned, degreased and machine sanded with P320 discs. This product has a matt finish. | |
Selemix 2.776.0350/2.776.0600 1K High Temperature Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please note: Available in a 25L pack size only Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
£189.72 (incl. VAT)
£158.10 (ex. VAT)
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
£48.88 (incl. VAT)
£40.73 (ex. VAT)
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
£41.57 (incl. VAT)
£34.64 (ex. VAT)
