Axalta Thinner General Industrial TH004
Use Axalta Thinner General Industrial TH004 (formerly known as Axalta Thinner No. 7) to thin and clean related Axalta products, such as Plicote HB Finish.
£65.44 (incl. VAT)
£54.53 (ex. VAT)
Formerly known as "Protega HT600" - a heat resistant, silicone resin based single pack finish suitable for all types of manifold and exhaust systems.
ViterTherm HT600 HR Finish, suitable for all types of manifold and exhaust systems.
Data | |
---|---|
Volume Solids | Matt Black - 22 ± 2% |
Silver - 15 ± 2% | |
VOC Content | Matt Black - 650 + 20 g/litre |
Silver - 717 + 20 g/litre | |
SG | Matt Black 0.91-0.93 kg/lt |
Silver 1.04-1.06 kg/lt | |
Flash Point | 23-60℃ |
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
---|---|---|---|
Minimum | 10 µm | 50 µm | 20.0 m2/litre |
Maximum | 15 µm | 75 µm | 13.3 m2/litre |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Applied to 15 microns DFT | 23℃ |
---|---|
Flash Off | 5 - 10 min |
Air Dry | Touch Dry - 20 min |
Hard Dry - 4 hr | |
Force Dry | 30 min @120-150℃ |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Mix thoroughly before use.
Application Conditions
Only apply in conditions of good ventilation which must be maintained during drying and curing.
Do not apply when rain, mist, sleet or snow are imminent.
During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3℃ above the dew point. Paint temperature should ideally be at a minimum of 15℃.
Application Methods
By conventional spray
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Axalta ViterTherm HT600 HR Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Use Axalta Thinner General Industrial TH004 (formerly known as Axalta Thinner No. 7) to thin and clean related Axalta products, such as Plicote HB Finish.
£65.44 (incl. VAT)
£54.53 (ex. VAT)
Axalta 950 Thinner, for use with the Axalta range of coatings, has a specially formulated blend of solvents designed to mix with its compatible paint/coating to create an optimal consistency for application whether it be for brush, roller or spray.Can also be used for the cleaning of some surfaces prior to application of the coating...
£38.36 (incl. VAT)
£31.97 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)