Tor Hi Build Zinc Phosphate Primer is a single pack high build primer for blast/manually cleaned steel. This excellent anticorrosive, which is lead and chromate free, has good coverage and is hard dry in 16 hours, ready for overcoating.
Features & Benefits
Anti-corrosive primer for blast or manually cleaned steel
Single pack, high build
Lead and chromate free
Good coverage - 6.45 square metres per litre
Applies by spray
Brush or short pile roller acceptable
Touch dry in 1 hour - hard dry in 16 hours, ready to be recoated
Refer below for more product information, preparation and application instructions
Product Information
A urethane alkyd binder with zinc phosphate anti-corrosive, together with inert inorganic pigments and thinned with low aromatic white spirit.
Product reference
AK623
Volume solids
48%
Typical thickness
75 microns dft from 155 microns wet
Theoretical coverage
6.45 square metres per litre
Practical coverage
Reduce theoretical coverage by up to 20%
VOC content
EU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC
Surface Preparation
Grit Blasting:
Blast clean to BS4272 2nd Quality (Swedish equivalent Sa 2.5) with maximum profile of 75 microns.
Manual Cleaning:
Acceptable standard is Swedish ST2. Avoid excessive burnishing.
Remove all dust before painting.
Application Details
Mix ratio
N/A
Method of application
Airless spray (tip size 0.017”-0.021” and 1800 psi atomising pressure). Brush or short pile roller acceptable.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
No, this primer is recommend for use on metals, assuming the timber is clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend Zinsser Cover Stain to prime timber.
Tor Hi Build Zinc Phosphate Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...