Sherwin-Williams Epidek M377 is a specially formulated 2-pack epoxy deck coating with suitable profile and co-efficient of friction to comply with current MoD(N) requirements for flight decks and weather decks.
Please note: Also available in White, Black, BS220 and Yellow subject to a minimum order quantity of 100L and an extended lead time of up to 14 working days - please see Sherwin-Williams Epidek M377 - Special Colours
Please note: Also available in White, Black, BS220 and Yellow subject to a minimum order quantity of 100L and an extended lead time of up to 14 working days - please see Sherwin-Williams Epidek M377 - Special Colours.
Sherwin-Williams Epidek M377 is a specially formulated 2-pack epoxy deck coating with suitable profile and co-efficient of friction to comply with current MoD(N) requirements for flight decks and weather decks. It can be used over suitably primed surfaces of steel or aluminium, and it may be used over suitably prepared concrete substrates.
Endorsements
Approved by MoD/DRA to AFS No. 1791 and DEF STAN 80-134 Type 1 Medium Texture.
BS476 Part 7 - Surface Spread of Flame Material - for details of substrate/scheme, consult Technical Team
Recommended Primers
For Steel
Macropoxy C425V2 Zinc Phosphate Primer/Buildcoat
Macropoxy L425 Zinc Phosphate Primer
For Aluminium
Macropoxy L425 Zinc Phosphate Primer
Recommended Topcoats
Normally applied as a two coat system. Indefinitely self overcoatable, provided that surface is clean, dry and free from contamination.
Product Details
m377
Data sheet
For Use On
Steel, Aluminium
Application Method
Brush, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Product Certifications
BS476 Part 7 - Surface Spread of Flame Material, Approved by MoD/DRA to AFS No. 1791 and DEF STAN 80-134 Type 1 Medium Texture
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage