Hemucryl Enamel HI-Build 58030 is a water-borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick-up, good weathering properties, and high gloss retention.
For professional use only
Use as a glossy, finishing coat in water-borne paint systems, interior and exterior, in moderately to severe corrosive environments
Service temperatures up to 120°C (dry exposure)
Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i
EC-type examined as a low flame spread material when used as part of a predefined paint system
Product customisation
Don't forget to save your customization to be able to add to cart
Hemucryl Enamel HI-Build 58030 is a water-borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick-up, good weathering properties, and high gloss retention. Especially suited for application by airless spray.
Use as a glossy finishing coat in water-borne paint systems, interior and exterior, in moderately to severe corrosive environments. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account. For handrails and the similar, a chemically curing coating is alternatively recommended.
Low dirt pick-up, good weathering properties, and high gloss retention
Service temperatures up to 120°C (dry exposure)
Especially suited for application by airless spray. Nozzle pressure: 130 bar [1900 psi] Nozzle orifice: 0.015-0.019". Can also be applied by brush
Glossy finishing coat for water-borne paint systems
For interior and exterior use
For moderately to severe corrosive environments
For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account
For handrails and the similar, a chemically curing coating is alternatively recommended
Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i
EC-type examined as a low flame spread material when used as part of a predefined paint system
Two coats of the topcoat may be necessary to obtain full hiding power.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness. Two coats of the topcoat may be necessary to obtain full hiding power.
Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Drying & Overcoating
Hempel’s Specification supersedes any recommendations given in the Product Data Sheets.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hempel Hemucryl Enamel Hi-Build 58030 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hemucryl Primer HI-Build 18032 is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray.Complies with EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory i Use as a primer in water-borne paint systems on interior...
Hemudur 18500 is a water-borne two-component polyamine cured epoxy primer containing zinc phosphate as corrosion inhibiting pigment.Cures to a strong and rust-preventing coat, for use as a general purpose primer on steel constructions Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...