Zinsser Wallpaper Cover-Up is an all-in-one primer, sealer & stain block with high hiding power that obliterates wallpaper print with a smooth matt, off-white finish. ADVANTAGES Prevents blistering of wallpaper Blocks water soluble stains Ensures good adhesion One coat Economical Decorative It can be overpainted with any conventional...
Coo-Var Alkali Resisting Primer Sealer
Coo-Var Alkali Resisting Primer Sealer is a high-quality, low odour, solvent-based primer/sealer for use on alkaline surfaces that can attack conventional decorative coatings.
- Interior/Exterior use
- Resistant to solvents
- Resistant to salts
- Combats varying degrees of porosity
- Matt finish
Coo-Var Alkali Resisting Primer Sealer is ideal as a high quality primer prior to painting. A high quality low odour solvent based primer/sealer ideal for use on alkaline surfaces which can attack conventional decorative coatings. Also helps combat surfaces with varying degrees of porosity.
Apply by brush or roller.
Drying time: Touch Dry 30 mins or 4 hours hard dry
Overcoat time: 4-6 hours
Estimated Coverage: 10m² per litre
Sources of damp must be repaired beforehand.
Recommended Dried Film Thickness Per Coat: 35-40 microns
Recommended Wet Film Thickness Per Coat: 100 microns
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Zinsser Peel Stop Primer is a clear coating to help prevent peeling, flaking, cracking, dusting or chalking. ADVANTAGES Internal/external use Glues down edges of old coatings Recoatable in 2 hours Seals and bridges cracking and crazing Binds chalky surfaces Flexible/Breathable Easy to use Easy to clean
This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).
Sika Primer 215 is a low viscosity primer that should be used to prime various plastics, timber and other porous materials prior to bonding with Sikaflex products. Because plastics vary so much in their chemical composition, preliminary trials are necessary.
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
Paint For Pros Quartz White Primer, a ready-to-use primer to improve adhesion of plaster, specifically MagnetPlaster. Easy to apply One layer provides sufficient strength Contains little to no solvent Meets health and safety requirements for indoor use Track-free after an hour Ready to plaster over after 12 hours
A unique water-based sealer for porous and potential problem surfaces. Gardz® is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.
Sikagard 551 S Elastic Primer is apPrimer for very dense or porous concrete surfaces or difficult application conditions. Sikagard 551S Elastic Primer is a one component solvented primer for Sikagard 550 W Elastic, Sikagard 545 W Elastofill and Sikagard 675 W ElastoColor.
A water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating. Easy to apply, easy to sand and can be used on alkaline substrates.
Sikagard 177 is a two-part epoxy, solvent free, laminating resin that is high viscosity epoxy resin for priming concrete substrates and cement based mortars on vertical surfaces and ceilings.
Essential for binding powdery and porous surfaces before decoration. It binds unstable surfaces, such as old lime wash and distemper, to provide a firm foundation on interiors and exteriors.