Keim Colourwash Textured Undercoat is an aggregated opaque white paint used for creating surface texture on bare and previously painted interior wall and ceiling surfaces prior to the application of Keim Colourwash Base.
≤ 0.02m Diffusion-equivalent air layer thickness (sd Value)
Limitations
Allow a minimum drying period of 12 hours before proceeding
Not suitable for plastic, wood or metal
Surface Preparation
Refer to technical data sheet and safety data sheet (see data sheet tab above)
Abrade gloss/sheen finishes with sandpaper to create a key
Repair/fill with only mineral-based materials (such as Keim Dolomitspachtel) and allow 1 day per millimetre thickness drying time
New lime plaster should be allowed a minimum period of 28 days to dry and a coat of Keim Colourwash Lime Primer applied 12 hours before painting
Ensure surfaces are clean, sound and dry
Ambient and surface temperature must be 5-30°C during application and drying
Protect surfaces not to be painted
Application
Stir Keim Colourwash Textured Undercoat thoroughly before application
Apply using a soft, wide brush (such as the Keim Oval Brush), working from the bottom of the wall upwards
Make overlapping “M” and “W” motions with the brush to create dimension, blending drips where required
Maintain a wet edge throughout application and work to a natural breakline
Allow a minimum period of 12 hours before proceeding
Any splashes must be rinsed off immediately with plenty of water
Clean tools immediately with water
Storage and Disposal
Storage:
Maximum 12 months when stored airtight in a frost-free environment
Protect from heat and direct sun
Disposal:
For disposal information refer to Section 13 of the Material Safety Data Sheet
EC Waste Code: 08 01 12
If further information is required, please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected].
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Keim Colourwash Textured Undercoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
A ready-to-use silicate filler suitable for small crack repair and surface equalisation onto internal mineral surfaces.Mineral based Suitable for full cover and touch-up Maximum filling powerMore Info View Similar Products Delivery Info Consumption Rate Samples
Application tools and accessories for Keim products. The range includes roller sleeves, cages and handles, brushes, sponges and cleaners.More Information Delivery Info
Keim Colourwash Base is a single-coat opaque white sol-silicate paint suitable for interior bare and previously painted walls and ceilings. For use as a base coat for Keim Colourwash.UV-stable, non-caustic, no dilution required No solvents, plasticisers or preservatives Very low odour Chemically bonds to the substrate or mechanically to...
Keim Colourwash is a ready-mixed translucent paint for interior decorative finishes, and must be applied over KEIM Colourwash BASE Suitable for bare and previously painted walls and ceilings Does not require diluting, noncaustic UV stable Flat matt finish Chemically bonds to the substrate or mechanically to existing paint Eco &...
Keim Colourwash Lime Primer is a primer made of pure potassium silicate and small organic additives used to regulate or reduce the absorbency of lime plaster and other highly absorbent mineral substrates, prior to the application of Keim Colourwash Base or Keim Colourwash Textured Undercoat.Brush Application Silicifies insolubly with the...