Tor Farm Oxide Semi-Gloss

AK789

Tor Farm Oxide Semi-Gloss is a general purpose finish with low toxicity, for use on and around farms and in farm buildings on a variety of substrates, including bare wood, steel and masonry.

  • Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit. Contains no lead pigments
  • Surface preparation required - refer further below for more details
  • For brush or roller application
    • Can be applied by conventional spray if thinned with Tor TH10
    • Refer below for application details
  • Good coverage - up to 12 square metres per litre
  • Touch dry in 4-5 hours - overcoat after 16 hours
Colour
Size
Finish
£22.68
VAT excluded

£27.22 Tax incl.
Quantity

Description

Tor Farm Oxide Semi-Gloss, a general purpose finish with low toxicity, for use on and around farms and in farm buildings on a variety of substrates, including bare wood, steel and masonry.

The semi-gloss finish can be applied by brush or roller, or can be thinned for use with a conventional sprayer.

Refer below for details on surface preparation and application.



Features & Benefits


  • Semi-gloss general purpose finish
  • Ideal for farm buildings
  • For use on a variety of bare substrates, including:
    • Wood
    • Masonry
    • Steel
  • For brush or roller application
    • Can be applied by conventional spray if thinned with Tor TH10
    • Refer below for application details
  • Low-toxicity
    • Ensure good ventilation during application and drying
  • Good coverage - up to 12 square metres per litre
  • Touch dry in 4-5 hours - overcoat after 16 hours



Product Information


Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit. Contains no lead pigments.

Product reference AK789
Volume solids 54%
Typical thickness 45 microns dft form 83 microns wet
Theoretical coverage 12 square metres per litre
Practical coverage 10 square metres per litre
VOC content EU limit value for this product (cat A/d): 300 g/l. This product contains max 300 g/l VOC



Surface Preparation


Bare Wood:

Thoroughly sand, wipe clean with Tor TH10 and prime with AK610 Tor Aluminium Wood Primer followed when dry by one coat of Farm Oxide.

Bare Steel:

Chip, scrape and wire brush to ST2 Swedish Standard and prime with Farm Oxide or AK618 Tor QD Red Oxide Primer followed when dry by one coat of Farm Oxide.

Bare Masonry:

Should be dry and free from any loose and flaking or powdery material, oil or grease. Stabilise by applying one coat of AK602 Tor SP Stabilising Sealer followed when dry by one coat of Farm Oxide.



Application Details


Mix ratio N/A
Method of application Brush or short pile roller. By reducing with 15-20% Tor TH5 or TH10 can also be applied by conventional spray.
Cleaner Tor TH5 for cleaning equipment
Pot Life N/A



Drying Times


Substrate Temperature Touch Dry Hard Dry Overcoating Interval
Minimum Maximum
20°C 4 -5 hours 16 hours 16 hours 28 days

Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures



Storage and Handling


Store in a safe place out of the reach of children

Flash point

  • Above 32°C

Shelf life

  • 2 years in unopened containers



Limitations


Ensure good ventilation during application and drying.

  1. Avoid skin and eye contact i.e. wear gloves, goggles, etc
  2. Ensure good ventilation, mechanical if necessary
  3. Store and use away from heat and flame
  4. Do not eat or smoke in the vicinity of work
  5. Wash hands before eating
  6. Refer to supply container for additional warning labels

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
AK789

Data sheet

Manufacturer
Tor Coatings
Parts
1
Base Type
Solvent
Solvent
Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit contains no lead pigments.
Mixing Ratio
-
Suitable Substrates
Bare wood, steel, masonry
Key Features
Semi-gloss finish for farm buildings
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
4 -5 hours
Dry to Handle (at 20°C)
-
Dry to Recoat (at 20°C)
16 hours
Fully Cured (at 20°C)
16 hours
Pot Life (at 20°C)
-
Coverage
12 square metres per litre
Recommended Thinner/Cleaner
Tor TH5 or TH10
Unit Contents
-
Compatible Primers
AK610 Tor Aluminium Wood Primer, AK602 Tor SP Stabilising Sealer
Compatible Topcoats
-
Max. Application Temperature
-
Min. Application Temperature
-
Density
-
Solids by Volume
54%
Heat Resistance (up-to)
-
VOC
This product contains max 300 g/l VOC
Shelf Life (from date of manufacture)
2 years in unopened containers
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Tor General Purpose Thinner

Tor General Purpose Thinner (TH10) is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.

Price £16.46
In stock
16 other products in the same category:

Zinsser Grade 1

Zinsser Grade 1 is a high performance paint for the interior decoration of walls and ceilings in traditional and historic buildings, including churches, castles and period properties. It s the perfect high-performance paint that acts as a primer, sealer and finish coat in one. Available in more than 60 colours in RAL & BS shades.

Price £40.47
In stock

Coo-Var White Glass Shading

Coo-Var White Glass Shading is a water based paste for dilution. Ideal to block out excess light and heat in factories and greenhouses. Helps to reduce interior temperature. Product Features Apply direct A water based paste for dilution Ideal to block out excess light and heat Finish: Matt Application: Brush or roller Drying time: 1-2...

Price £28.17
In stock

Bedec Blockfill

A One-coat, crack filling, interior paint system that is a high build obliterating water based matt finish suitable for use on internal walls and ceilings. Designed to infill block and brickwork to give a smoother surface where cost of rendering and plastering is not required.

Price £115.08
In stock

Zanders Cover Coat Vinyl Matt

Zanders Cover Coat Vinyl Matt is an ultra-quality matt emulsion suitable for all interior walls and ceilings, providing a completely flat finish with excellent durability, excellent opacity, coverage & application properties. Features and Benefits No flashing Dries flat Touches up Excellent opacity Wipeable

Price £41.77
In stock

Bedec Interior-Flex Elastomeric Matt Emulsion

Bedec Interior-Flex Elastomeric Matt Emulsion is an elastomeric matt emulsion paint formulated to coat interior ceilings and walls. A unique product designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion. Features and Benefits Smooth matt finish Flexible and breathable...

Price £24.87
In stock

Cromadex 800 Two Pack Non-Isocyanate Acrylic Glass Coating

Cromadex 800 Two Pack Non-Isocyanate Acrylic Glass Coating is a two pack non-isocyanate acrylic topcoat with excellent durability and chemical resistance. The product uses unique resin technology to enable direct adhesion to glass for “backpainted” glass projects and for internal decorative effects in shop-fitting. Available in a wide range of colours,...

Price £159.42
In stock

Tor Tormastic Colour Coating

Tor Tormastic Colour Coating, a gloss finish in over 350 colours from RAL and BS for wood, metal and cementitious substrates. Ideal for farm and industrial building renovations Good colour stability Economical - most colours cover with one coat Apply over conventional primers Good coverage up to 12 square metres per litre Apply by...

Price £13.39
In stock

Mathys Paracem Deco Matt

Mathys Paracem Deco Matt is a high-quality, trade decorative matt interior wall paint for finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) in private as well as public buildings. Excellent flow Good mechanical resistance against rubbing Smooth mat aspect High covering power...

Price £25.83
In stock

Bedec Aqua-Advanced High Obliterating Matt

A high build, high obliterating water based matt finish suitable for use on internal walls and ceilings. Designed to infill blockwork and brickwork and cover most surfaces in just one coat.

Price £16.87
In stock

Mathys Fair Decor

Mathys Fair Decor is an additive to water based paint to extend the drying time and reduce flow for producing paint effects such as dragging, rag rolling and marbelling.  To prolong the drying time of waterborne paints

Price £9.48
In stock

Mathys Paracem Deco Ceiling

Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls that can be applied on most mineral substrates providing an excellent one coat ceiling paint. Exceptional high covering power (covers mostly in 1 layer) Uniform matt finish without laps Delayed drying (enables to paint large surfaces)...

Price £26.88
In stock

Mathys Paracem Effects Primer

Mathys Paracem Effects Primer is a water based acrylic primer for interior porous surfaces prior to painting them with Mathys Paracem Effects Sand/Sable. Reinforces the substrate and decreases absorption For porous, non-painted surfaces Ideal for bricks, plaster & concrete

Price £24.49
In stock

Bedec Scumble Glaze

A water based, slow setting acrylic glaze, suitable for paint effects such as rag rolling, stippling, sponging, and marbling.

Price £17.84
In stock

Coo-Var Finest Pale Goldsize

Coo-Var Finest Pale Goldsize is a special adhesive preparation suitable for guilding work and as a mixing varnish. For use when applying gold leaf. Product Features Protects ornate work Ideal for gold leaf application Mixing varnish Apply direct Gloss finish

Price £10.18
In stock

Mathys Paracem Effects Finish

Mathys Paracem Effects Finish is a water based acrylic varnish used as a finish for interior decorative paints where a high mechanical resistance is required. The recommended topcoat for Paracem Effects Sand/Sable or Fair Decor. Does not yellow Easy application with roller or brush Uniform clear satin finish Washable

Price £12.61
In stock

Mathys Fairtex

Mathys Fairtex is a matt acrylic paint for the decoration of interior walls and ceilings. Can be applied to most common substrates including plaster, brick and concrete. Even old paint in good condition and most types of wallpaper can be directly recoated. Smooth and completely splash-free roller application Covers on porous and non porous...

Price £22.11
In stock