"

Rust-Oleum Speed Patch Pourable Grade

Rust-Oleum Speed Patch Pourable Grade View larger
Typical Coverage (per coat)0.5m² @ 25mm thick per 25kg
Touch Dry30 mins
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

A quick setting, pourable repair mortar that is ideal for patch repairs for heavily trafficked floors.

Read Full Description

More details

£80.06 + VAT

Rust-Oleum Speed Patch Pourable Grade is a quick setting, pourable repair mortar that is ideal for patch repairs for heavily trafficked floors.

Rust-Oleum Speed Patch Pourable Grade provides a quick and easy way to fill holes in heavily used concrete floors inside or outside. No primer is required - just mix the powder with water and pour into the hole. This rapid setting concrete repair bonds to damp or dry surfaces and can be applied at thicknesses from feather edge to 100mm.

Features & Benefits

  • Accepts heavy traffic 2 hours after application
  • Easy to prepare: add water and mix
  • Possible to apply on slightly wet concrete
  • Sets at low temperatures (5°C)
  • For deep or shallow repairs

Send us your question

Question

Hi, we have purchased the speed patch pourable do we have to mix the whole batch at once or can we mix small amounts? regards Andy Eagles

andy eagles from peterborough (united kingdom) - 28/03/17

Answer

Directions for Use

Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To achieve a pourable mix, add 3 parts of powder to one part of water (by volume). Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Speed Patch Pourable into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5 - 10 minutes at 20°C). The remaining powder can be stored for future use.

Application

When a smooth consistency is achieved, simply pour Speed Patch in to the hole. If the product has been properly mixed it will self-level and will need minimal trowelling. Speed Patch Pourable can be applied in any depth between 5 mm and 100 mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Pourable Grade TDS

Download

Pourable Grade MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.