Instarmac UltraCrete Instagrip Anti-Skid Patch Repair

GRIPBLACK

For the patching and reinstating of high friction areas after maintenance work has taken place.

  • Restores anti-skid
  • Fast return to service
  • Available in a range of colours Grey, Buff, Red, Green, Black
  • Easy to use
  • Set time: 1-2 hours
Colour
  • Current colour: Grey
Choose a colour
Close colour picker
  • Black
  • Red
  • Green
  • Buff
  • Grey
Size
£93.24
VAT excluded

£111.89 Tax incl.
Quantity

Description

Instarmac UltraCrete Instagrip Anti-Skid Patch Repair

Instagrip is ideal for the patching and reinstating of high friction areas after maintenance work has taken place. It is perfect for use on pedestrian crossings, junctions, roundabouts, footbridges, subways, steel plates and manhole covers.

  • Restores anti-skid
  • Set time: 1 – 2 hours
  • Easy to use
  • Fast return to service
  • Available in: Grey, Buff, Red, Green and Black
  • Size: 15kg bucket

Applications

UltraCrete Instagrip is a resinous repair system for the patching of anti-skid areas or the reinstatement of anti-skid sections after maintenance work has taken place. The product is suitable for the anti skid patch repair of high friction surfacings typically placed on pedestrian crossings, junctions, roundabouts, footbridges, subways, car parks, etc. Instagrip is also ideal as an anti-skid surface on steel road plates and manhole cover frames.

Technical

Instagrip is a two-part solvent free polyurethane resin system, dressed with calcined bauxite aggregate. The product conforms to the Specification for Highways Works, clause 924 and Chapter 6 High Friction Surfacing of the Specification for the Reinstatement of openings in Highways, for resin-based skid resistant surface treatments.

Instagrip is supplied as a two-component system in pre-weighed packs. The resin has a pot life of between 10 and 20 minutes dependant on the ambient temperature and humidity.

Full preparation and mixing instructions can be found on the product data sheet.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
GRIPBLACK

Data sheet

Manufacturer
Instarmac
Key Features
Restores anti-skid - Set time: 1 – 2 hours - Easy to use - Fast return to service
Fully Cured (at 20°C)
1-2 hours depending on ambient temperature and humidity
Coverage
1.5m² assuming smooth surface. Coverage will be affected by surface texture
Tensile Strength
14N/mm²
Shelf Life (from date of manufacture)
Shelf life in correct conditions for sealed packaging is 12 months
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Instarmac UltraCrete Instaline Thermoplastic Road Marking

Instaline is ideal for the reinstatement of line areas on car parks, roads and carriageways. This thermoplastic road marking provides anti-skid, is reflective and easy to apply. Conforms to BS EN 1436:2007 as a road marking material Remains flexible and easy to un-roll in temperatures as low as 5°C No waste, cut as required

Price £14.27
In stock

Instarmac UltraCrete LMP (Line Marking Paint)

Ideal as an effective and quick method for line or spot marking of pothole repairs, car parks, warehouses, sports halls and building sites. No waste Easy adhesion  Durable Economical Available in a range of colours yellow, white, blue

Price £5.19
In stock
16 other products in the same category:

Ennis-Flint Reflective Glass Beads

Reflective Glass Beads to increase reflectivity, durability and slip resistance of surface applied coatings. For ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981.

Price £25.45
In stock

Ennis-Flint MMAXGRIP PRMX 65

Ennis-Flint MMAXGRIP PRMX 65 is a MMA-based coating that was developed specifically for application to public main roads and side streets as well as other traffic zones. Its special properties make MMAXGRIP PRMX 65 particularly suitable for surfaces where coloured road markings are required on main roads and side streets in urban areas and elsewhere.

Price £102.69
In stock

Instarmac UltraCrete M90 All Purpose, Fast Set Mortar

M90 is ideal for bedding access covers and general repairs. This general purpose mortar conforms to HD27/04, and a rapid strength gain and can be opened to traffic in 90 minutes. Workability: 5 – 10 minutes Set time: 20 minutes Depth: 10mm – 75mm 21N/mm² compressive strength in 2 hours Approved for use on the London Underground and...

Price £14.32
In stock

Ennis-Flint Flexiline Thermoplastic Symbols

Ennis-Flint Flexiline Thermoplastic Symbols are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Flexiline Thermoplastic Symbols provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any...

Price £13.46
In stock

Stimsonite 381/C80 Inset Road Studs

Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².

Price £10.50
In stock

Ennis-Flint PFT Overbanding

Ennis-Flint PFT Overbanding is a skid-resistant overbanding and crack sealant preformed thermoplastic designed for application to asphalt surfaces to prevent water ingress and progressive fretting. Prevents water ingress instantly, and can be trafficked immediately. Cools and hardens within within minutes. Available in boxes of 12. For...

Price £78.00
In stock

Ennis-Flint Thermaline

Thermaline, a new preformed thermoplastic road marking, has been developed as part of the Ennis-Flint Thermoplastic products range. Thermaline compliments the road marking programme by its various uses and material makeup. Thermaline is ideal for areas with light traffic, such as playgrounds. It is an easy to apply, durable and cost effective...

Price £7.72
In stock

Ennis-Flint CP Primer

Ennis-Flint CP Primer is a high quality, thin solvent based resin solution for priming concrete surfaces, used to improve adhesion between concrete and surface materials, e.g. hot melt bituminous compounds, thermoplastic or epoxy resin.

Price £50.02
In stock

Instarmac UltraCrete Tough Patch Rapid

An instant solution for utility apparatus installations and reinstatements, permanent repairs and patching in footpaths, and temporary pothole repairs in carriageways. Certified for use through the Product Assessment Scheme (PAS) First time permanent, emergency and temporary repairs Rapid curing, instantly trafficable High deformation...

Price £26.33
In stock

Instarmac UltraCrete LMP (Line Marking Paint)

Ideal as an effective and quick method for line or spot marking of pothole repairs, car parks, warehouses, sports halls and building sites. No waste Easy adhesion  Durable Economical Available in a range of colours yellow, white, blue

Price £5.19
In stock

Ennis-Flint PFT Overbanding (BBA Approved)

Ennis-Flint PFT Overbanding (BBA Approved), a highly durable overbanding material for permanent crack repair (up to 5mm in wifth) in asphalt and concrete surfaces, preventing water ingress and frost damage. BBA approved - see certificate 19/H228 - assessed for performance and durability - and HAPAS approved by the British Board of Agrément...

Price £95.40
In stock

Ennis-Flint Flexiline Thermoplastic Letters & Numbers

Ennis-Flint Flexiline Thermoplastic Letters & Numbers are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Thermoplastic Letters & Numbers provide all your requirements, for hard wearing, quick and easily applied surface marking...

Price £3.61
In stock

Stimsonite Road Stud Adhesive

Stimsonite Road Stud Adhesive is a high performance hot-melt modified bituminous product used to bond Stimsonite road studs to both asphalt and concrete in temperate climates. Stimsonite Road Stud Adhesive exhibits improved flexibility at low temperatures, while retaining good flow resistance. When melted it forms a highly adhesive...

Price £36.26
In stock