Coo-Var Polyurethane Varnish
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only.
- For Interior Use
- Suitable Surfaces: Wood
- Finish: Matt
- Application: Roller or brush
- Drying time: Touch Dry 2 hours or 12 hours hard dry
- Overcoat time: 12 hours or overnight
- Estimated Coverage: 14m² per litre
Coo-Var Polyurethane Varnish is a single pack varnish of exceptional durability based on urethane alkyd. Coo-Var Polyurethane Varnish is intended for interior use only and is available in matt, eggshell and gloss finishes. Perfect for kitchen furniture, worktops and internal doors.
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced.Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Ensure no sediment is left on the bottom of the can and that the product is thouroughly mixed. This is required to ensure a consistent sheen level throughout the application.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Coo-Var Polyurethane Varnish.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior / Exterior Use
- Water / Solvent Based
- For Use On
- Application Method
- Brush, Roller
- Matt, Gloss, Eggshell
- Single, Two or Three Pack
- Pack Size
- 1L, 2.5L, 5L
- Base Type
- Urethane Alkyd
- 14m² per litre
- Recommended Thinner/Cleaner
- Thinner 14
- Solids by Volume
- Touch Dry
- 2 Hours
- Recommended Dry Film Thickness
- 30-35 microns
- Recommended Wet Film Thickness
- 70 microns
- UN Number
|Lydia on 2020-05-04 13:12:17|| |
Can this be used on kitchen work tops and is it safe to prepare food on it once it’s dried
No and no unfortunately.
|John on 2020-04-22 09:56:10|| |
Can i use the Polyutethane varnish over painted stairs as a protective coat? They stairs have been painted using Dulux Trade Satinwood White paint. I just want to protect the paint from chipping off under impact. Stairs are internal. Thanks John
Assuming you test a small area prior to full application for compatability this could be used in this application.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.