Rust-Oleum Dacfill Frigo Gas & Vapour Tight Coating

56.WIT.25P

We no longer stock this product. We have no alternative product for gas and vapour tight properties, but for or “normal” duties, an option from the Paracem or Murfill ranges could be considered depending upon actual project requirements. Please contact our Technical team with details of your project on 0113 2455450 (option 2) or send a message to [email protected]

Quantity

Description

We no longer stock this product. We have no alternative product for gas and vapour tight properties, but for or “normal” duties, an option from the Paracem or Murfill ranges could be considered depending upon actual project requirements. Please contact our Technical team with details of your project on 0113 2455450 (option 2) or send a message to [email protected]

Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength. Rust-Oleum Dacfill Frigo is solvent free, does not contain bituminous products and builds an abrasion resistant rubberlike coat without joints or seams which is hardly flammable and self-extinguishing (DIN 4102).

Features & Benefits

  • Gas and vapour tight rubberlike coating
  • Ideal for cold stores and storage rooms
  • Resistant against sudden variations in temperature
  • Does not contain solvents or bituminous products
  • Flexible and impact resistant
  • Self-extinguishing (DIN 4102)


Surface Preparation
Clean the substrate.
Rust-Oleum Dacfill Frigo can be applied on:

  • 1. Directly on insulation material such as polystyrene foam, polyurethane and other
  • 2. With an adhesion layer, on concrete, bricks, wood, zinc, aluminium, etc.

On very porous substrates, e.g. cellular concrete: apply first an impregnating coat of Mathys Pegafix or Rust-Oleum Mathys Primer 44 HS.

Directions for Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application & Thinning

  • Brush: Apply undiluted.
  • Roller: Apply undiluted.
  • Air-atomised spray: Not recommended
  • Airless spray: Nozzle: 018 - 026 / Pressure: 220 bars
  • Cleanup: Water


Application Conditions
Minimum 5°C / maximum 85% R.H.

Remarks
When making new cold stores vapour tight, 2 or more layers are needed, to restore existing vapour-tight coatings 1 coat is enough.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
56.WIT.25P

Data sheet

Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
4 Hours
Dry to Recoat (at 20°C)
24 Hours
Fully Cured (at 20°C)
1 Week
Coverage
0.5 - 1.5kg per m²
Min. Application Temperature
5°C
Solids by Volume
55 %
VOC
35 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
1 Hour 30 Mins
Recommended Dry Film Thickness
380 µm
Recommended Wet Film Thickness
680 µm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send