Ennis-Flint MMAXGRIP PRMX Catalyst
We no longer stock this product, but can recommend Hitex BPO Powder Catalyst as a potential alternative*.
*Please note: it is important to check that this alternative product is suitable for your requirements, please contact our Technical Team on 0113 2455450 (option 2) or send a message to [email protected] before purchasing to ensure this product would meet your project requirements.
Ennis-Flint MMAXGRIP PRMX Catalyst is an essential component of MMA–based Ennis-Flint products. When mixed with Ennis-Flint MMA products it both starts and adjusts the curing reaction. The reaction speed can be influenced by adjusting the amount added, and this method is used to adapt the reaction to the ambient conditions (temperatures). Easily soluble, highly effective.
- Please contact us for delivery options
Ennis-Flint MMAXGRIP PRMX Catalyst is an essential component of MMA–based Ennis-Flint products. It both starts and adjusts the curing reaction. The speed of the reaction is adjusted to the ambient conditions by modifying the amount of catalyst added.
Features & Benefits
- Easily soluble
- Highly effective
Areas of Application
MMAXGRIP PRMX Catalyst is mixed with Ennis-Flint MMA products such as Ennis-Flint MMAXGRIP PRMX Primer, Ennis-Flint MMAXGrip PRMX 45 and Ennis-Flint MMAXGRIP PRMX 65 to enable the curing process to take place. It both initiates and controls the speed of the curing reaction. The reaction speed can be influenced by adjusting the amount added, and this method is used to adapt the reaction to the ambient conditions (temperatures).
- 0.10 kg in plastic bag
- 5.00 kg in carton
Required Amounts of Catalyst
The amount of catalyst required is dependent on the product used, the quantity of product and the temperature conditions. For further details about the recommended quantities of catalyst please refer to the product information
sheets for MMA-based products.
Add the catalyst to the MMA-based product while stirring with a mechanical twin-paddle stirrer, as the stirring action causes the catalyst to dissolve and ensures an even distribution. For exact details please refer to the product information sheets for the MMA-based Products.
The catalyst must only be stored in closed containers and in dry areas, away from heat and ignition sources, and at temperatures below +30 ˚C. In the original packaging it has a minimum shelf life of 6 months. The influence of heat can cause the powder to clump together and can reduce its effectiveness. The powder can self-ignite if it is heated to a higher temperature, e.g. by direct sunlight. Consequently, direct sunlight should also be avoided on site.
- Single, Two or Three Pack
- Pack Size
- 5KG, 100G
- UN Number
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Ennis-Flint MMAXGRIP PRMX Catalyst is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT