A premium quality, long life, trowel applied, ready to use, through-coloured, thin-coat render which is formulated based on Pliolite Resin Technology. AX1 has excellent adhesion and breathability properties, and Pliolite Technology has been proven to work effectively on properties for over 45 years.
Total waterproofing - rain resistant in 20 minutes - algae resistant
Complete colour stability - flexibility that helps prevent cracking
Low temperature application down to -5℃ - very low maintenance eliminates painting
DO NOT apply to a wet substrate under any circumstances
Other colours are available on request - subject to extended lead times and additional cost
Wethertex AX1 Pliolite Thin Coat Render is a premium quality, long life, trowel applied, ready to use, through-coloured, thin-coat render which is formulated based on Pliolite Resin Technology. AX1 has excellent adhesion and breathability properties, and Pliolite Technology has been proven to work effectively on properties for over 45 years. This product will not only fully waterproof your property and create a beautiful finish, but will also allow the building to breathe naturally due to its high vapour transmission rate, this in combination with the high adhesion benefits of Pliolite resins ensures that your property will be protected with the best quality wall coating technology available on the market.
Total waterproofing - Rain Resistant in 20 minutes
Complete colour stability
Algae resistant
Allows the wall to breathe
Very low maintenance
Unbeatable bond strength
Eliminates painting
Flexibility that helps prevent cracking
Anti-Crack
Low temperature application - down to -5℃
Ready to use
DO NOT apply to a wet substrate under any circumstances
Please Note: Other colours are available on request - these may be subject to extended lead times and additional cost. If the colour you require is not available to choose above, please contact our Technical Department for a quote on0113 2455450 (option 2) or email [email protected]
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can this product be used over existing sand and cement render to smooth over sponge marks left by plasterer
Answer from Rawlins’ Technical Team:
This is a trowel applied thin coat render, this is not designed to hide imperfections in the substrate, the depth of these marks will depend if it will mask these, but we would recommend they should be addressed prior to application.
John chalcraft on 2022-06-27 11:53:48
Question:
What coverage do I get from 25kg of the thin coat render . Thanks
Answer from Rawlins’ Technical Team:
The coverage rate for 25kg is approximately 10m².
David on 2021-10-27 13:49:04
Question:
Can this be used to repair old, cracked render on an exterior chimney stack to make it watertight? Water ingress seems to be coming through the mortar in the bricks underneath the render and penetrating into the plaster in the loft.
Answer from Rawlins’ Technical Team:
This product can be applied to compatible substrates once the necessary repairs to the cracked render have taken place.
Loose or flaking material must be removed, cracks repaired then Wethertex X71 1 Polymer Levelling Base Coat should be applied to reinforce and waterproof the repairs prior to application.
This a waterproof system but it will not rectify any structural issue that is causing the water ingress.
EILEEN MURPHY on 2021-08-18 16:55:27
Question:
AN i USE IT BELOW THE dpc COURSE TO COVER BADLY SCARRED BRICK FACE? THANKS EILEEN
Answer from Rawlins’ Technical Team:
No, to avoid dampness and discolouration rendering should be avoided below DPC or within 150mm of ground level.
Wethertex AX1 Pliolite Thin Coat Render is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A ready mixed, flexible, through coloured penetrating primer in 20 exclusive colours prior to the application of MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render.Good coverage - approximately 8-9m2 per litre High adhesion - highly polymer modified - flexible - supplied ready mixed Low temperature application (down to -5℃) - Dry...
Highly polymer modified high performance cement based waterproofing levelling base coat which has excellent workability and finishing time properties, the No1 all round product for multiple substrates. This product can be applied by hand or spray in low temperatures and used as a base coat ready to receive a suitable finish coating.Long...