RSL Resuscreed HCS

CRNT

RSL Resuscreed HCS, formerly known as Resucrete, a three-pack, heavy-duty epoxy resin screed for new and existing concrete floors, laid from 6mm to 9mm nominal thickness.

  • Withstands aggressive cleaning methods including thermal shock from steam cleaning and high pressure washing
  • Excellent adhesion
  • High compressive, tensile and flexural strength
  • Impervious
  • Good slip resistance
  • Excellent abrasion and impact resistance
  • Low odour
  • Excellent chemical resistance
  • Recommended uses include:
    • Chemical production and storage
    • Engineering and manufacturing facilities
    • Pharmaceutical production
    • Automotive industry
    • Aerospace production areas
    • Industrial workshops
    • Commercial kitchens
  • See below for ordering references, available colours and lead times

Colour
  • Current colour: Flint Grey
Choose a colour
Close colour picker
  • Salsa Red
  • Stirling Grey
  • Flint Grey
  • Kingfisher Blue
  • Marigold
Size
Finish
£54.23
VAT excluded

£65.08 Tax incl.
Quantity

Description

RSL Resuscreed HCS, formerly known as Resucrete, is a three-pack, heavy-duty epoxy resin screed for new and existing concrete floors, laid from 6mm to 9mm nominal thickness. Resuscreed HCS offers excellent chemical resistance, high compressive and flexural strengths and very high impact resistance. Resuscreed HCS will withstand aggressive cleaning methods including thermal shock from steam cleaning and high pressure washing.

Recommended uses:

  • Chemical production and storage
  • Engineering and manufacturing facilities
  • Pharmaceutical production
  • Automotive industry
  • Aerospace production areas
  • Industrial workshops
  • Commercial kitchens



Quick Links - Click To Jump To Section:




Ordering References


Colour Nearest RAL Match Size Finish Mimimum Order Quantity
Flint Grey RAL 7005 17KG or 34KG Textured 1
Marigold RAL 1005 17KG or 34KG Textured 10 (made to order - extended lead times may apply)
Salsa Red RAL 3011 17KG or 34KG Textured 1
Stirling Grey RAL 7004 17KG or 34KG Textured 10 (made to order - extended lead times may apply)
Kingfisher Blue RAL 5017 17KG or 34KG Textured 10 (made to order - extended lead times may apply)



Features & Benefits


  • Formerly known as Resucrete
  • Three-pack
  • Heavy-duty epoxy resin screed
  • For new and existing concrete floors
  • Laid from 6mm to 9mm nominal thickness
  • Withstands aggressive cleaning methods including thermal shock from steam cleaning and high pressure washing
  • Excellent adhesion
  • High compressive, tensile and flexural strength
  • Impervious
  • Good slip resistance
  • Excellent abrasion and impact resistance
  • Low odour
  • Excellent chemical resistance



Product Information


Product Information
System Thickness (Recommended) 6-9mm
Solids Content by Weight 98%
Pack Sizes 17 Kg & 34 Kg
Pack Make Up 1 x Base
1 x Hardener
1 x Aggregate (for 17 Kg units) or 2 x Aggregate (for 34 Kg units)
Shelf Life 36 months (Base, Hardener & Aggregate)
Storage Keep out of direct sunlight. Store in a dry place, between 15℃ - 30℃



Application Information (at 20℃)


Application Information
Coverage Rate (Practical) 17 Kg will cover 1.28 m2 at 6mm or 0.85 m2 at 9mm
* Coverage rate is calculated based on a sealed and smooth surface and may vary based on the substrate roughness and other conditions.
Pot Life 30 Minutes
Recoating Intervals For Seal Coats, 12 - 16 Hours
Light Traffic 12-16 hours
Full Traffic 72 hours
Full Chemical Cure 7 days



System Specification


  • Product: Resuscreed HCS
  • Finish: Textured finish
  • Recommended thickness range: 6mm to 9mm

 

Products required for this system

  • Prime: Resuprime ST on dry substrates, or use Resuprime MVT on damp surfaces where required
  • System: Resuscreed HCS
  • Surface Seal: Not required. Optional seal coats include Resupen WB (For matt finishes) or Resutile (For increased chemical resistance)



Preparation


New concrete Floors: Must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and make sure all residue detergent is washed and removed by rinsing with clean water.

Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion and suitability as it may not be compatible with existing floor coating.

Where overcoating other systems such as epoxy coatings or screeds, as part of a specified composite system in the data sheets, please follow the recoat time as stated in the individual data sheets, the coating in each stage should be tack free, but not fully cured. If fully cured then mechanical preparation is required to ensure intercoat adhesion.



Priming


Open and porous substrates may require priming with Resuprime ST on dry substrates only with less than 75% ERH reading. Where the Relative Humidity of a substrate exceeds 75% ERH Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203:2017.

The number of coats to be applied is chosen in accordance with the following table.

ERH % Required Coating Thickness
75-85 1 coat of Resuprime MVT at 200 microns per coat
85-92 2 coats of Resuprime MVT at 200 microns per coat
92-97 3 coats of Resuprime MVT at 200 microns per coat

For further information please refer to recommended individual product data sheets.



Application


The ambient temperatures of the areas should not be allowed to fall below 15°C throughout the application and the curing period, as this could have an adverse effect on the appearance and colour of the system.

Surface temperature must be above 10°C. Where possible it is recommended that the application area is heated to a minimum temperature of 15°C ideally to allow the ambient and substrate temperature to stabilise prior to installation.

Mixing: Pre-mix the coloured base component to a uniform consistency (N.B. base will appear gelled in the tin but will become fluid with mixing) then mix the entire contents of the base with the hardener. If a separate mixing bucket is being used mix thoroughly ensuring all contents of both components are removed from the buckets supplied.

Add the aggregate component slowly whilst mixing. Mix using an electric mixer for approximately two to three minutes until the three components have fully combined. For larger units a forced action mixer may be required to fully combine the aggregate into the resins.

Resuscreed HCS should be worked with a trowel or float to achieve a dense, compacted finish. This is best achieved by the application of smooth even pressure in one direction, gradually increasing the pressure as the material compacts and beds down. Over-working the material will draw fines to the surface which may result in resin-rich spots and finish variations.



Category Guide


  • FeRFA Category: 8



Technical Information


The following figures are obtained from laboratory tests and our experience with this product .

Technical Information
Slip Resistance Dry > 60
Method BS7976 pt1-3 2002 Wet: Please consult our technical team
The slip resistance of a floor surface can vary as a result of the installation process, conditions at the time of application and subsequent traffic. Inappropriate cleaning or maintenance can adversely affect the performance. For further advice on potential wet areas please consult our technical team.  
Abrasion Resistance Method BS EN 13892-4:2002 AR 0.5
Temperature Resistance Tolerant of temperatures up to 60℃
Chemical Resistance Excellent chemical resistance; consult our technical team on specific materials
VOC 49 g/l - Calculation based on a full mixed unit



Maintenance and Cleaning


Sherwin-Williams recommend that Resuscreed HCS should be cleaned with a regular industrial cleaning regime with a floor scrubber utilising R.S. Industrial Floor Cleaner or similar with dirty water being removed. Isolated localised cleaning can be carried out using R.S. Tyre Mark Remover, Degreaser W500 & R.S. Oil Remover. All surfaces should be thoroughly rinsed with clean water after the use of chemical cleaners.

Product Details
CRNT

Data sheet

Application
Trowel, Float.
Coverage
17kg will cover 1.28 m sq. @ 6mm or 0.85 m sq. @ 9mm
Touch Dry
12-16 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

RSL Resuseal WB

Resuseal WB is a multi-purpose, two-pack, water-based epoxy coating primarily for concrete walls and floors. It can also be applied to concrete poured 7 days prior, as well as wood for a dust-free finish.  Low odour  Silica Free  Superb adhesion  Hard wearing  Hygienic Dust-free Some product colours are made to order and have minimum...

Price £50.53
In stock

RSL Resupen WB

Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...

Price £105.44
In stock

RSL Resutile

Resutile ST and Clear is a hard-wearing, two-pack polyurethane floor coating which is designed to provide exemplary protection from any abrasion, chemicals or impact. It also removes graffiti. Chemical resistant and UV stable Abrasion, thermal shock and impact resistant Hygienic & easy to clean Impressive flexibility - high...

Price £120.81
In stock

RSL Resuprime ST

Resuprime ST (formerly known as Resuprime) is a two-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces.  Features and Benefits: Versatile for many types of application Excellent adhesive properties Easy to apply Can be used as a tack coat for screeds No...

Price £68.19
In stock

RSL Resuprime MVT

RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood.  Features and Benefits:...

Price £19.80
In stock