• Rust-Oleum 5130 Primer DSP

Rust-Oleum 5130 Primer DSP

Rust-Oleum 5130 Primer DSP is a super-high solids two pack epoxy resin primer designed for the suppression of vapour pressure effects.

  • Creates a barrier to stop rising moisture and vapour pressure
  • Prevents blistering
  • For use on asphalt and concrete
  • Very low solvent content
  • High build system
Colour
Size
Finish
£42.84
VAT excluded

£51.41 Tax incl.
Quantity

Description

Rust-Oleum 5130 Primer DSP

Rust-Oleum 5130 Primer DSP is a super-high solids two pack epoxy resin primer designed for the suppression of vapour pressure effects to prevent air/moisture blistering on suspect concrete and asphalt balcony surfaces, suspended decking etc. prior to the application of a Rust-Oleum floor coating.

  • Creates a barrier to stop rising moisture and vapour pressure
  • Prevents blistering
  • For use on asphalt and concrete
  • Very low solvent content
  • High build system

Technical Data

  • Density: 1,1
  • Gloss Level: Gloss
  • Solids content in volume: 96%
  • Mixing Ratio: Base : Activator = 1,7 : 0,8 (Volume)

Drying Times At 20°C/RH 50%

  • Touch dry: 6 hours
  • Dry to handle: 16 hours
  • Dry to recoat: After 16 hours, but within 48 hours
  • Fully cured: 2 days
  • Pot Life: 30 minutes

Theoretical Consumption

4m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Ensure surfaces are sound, clean, contaminant-free and as dry as possible before coating. Thoroughly scrub down all dirty surfaces with Rust-Oleum ND 14 (see PDS) alkaline detergent solution followed by thorough rinsing (alternatively steam clean) and dry off. Remove residual contamination by scraping, surface grinding etc. Mechanically remove any unsound/incompatible coatings. Fully grind bare concrete to give an open sandpaper like surface. Reduce undulations/peaks etc by mechanical abrasion or grinding. Remove laitance by acid cleaning and subsequent rinsing. Best results are obtained when blasting the floor. Repair holes or large cracks with Pegacrete or 5180 Epoxy Repair Mortar (see PDS for details).

Application Conditions

Minimum 10°C. Provide air ventilation: open windows and doors.

Application Methods

  • Brush: Use undiluted.
  • Roller: Do not dilute. Use a 12-15 mm polyamide roller.
  • Rake/Trowl: Spread out the necessary material over the surface and distribute evenly using a rake or trowel. Use a spike roller if necessary to de-aerate coating

Remarks

Do not apply to inadequately prepared or unsound surfaces. Do not apply as surface temperatures below 10°C or overnight ambient temperatures below 5°C. Low overnight temperatures may further extend minimum overcoating times. Overcoating should be carried out within the timescales above to promote maximum intercoat adhesion and avoid film defects. Ensure surfaces are clean between coats.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Mixing Ratio
Base : Activator 1,7 : 0,8 (Volume)
Application
Brush, Roller
Dry to Handle (at 20°C)
16 Hours
Dry to Recoat (at 20°C)
After 16 hours, but within 48 hours
Fully Cured (at 20°C)
2 Days
Coverage
4m² per litre
Recommended Thinner/Cleaner
Rust-Oleum Thinner 160
Min. Application Temperature
10°C
Solids by Volume
96%
VOC
198 g/l
Shelf Life (from date of manufacture)
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
6 Hours
Recommended Dry Film Thickness
240 µm
Recommended Wet Film Thickness
250 µm
UN Number (Activator)
UN3066
UN Number (Base)
UN3082
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 160

Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment. Strong dilution...

Price £13.04
In stock

Rust-Oleum Mathys ND14 Cleaner Degreaser

Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Concentrated formulation can be diluted 1:20 Use as additive for high pressure cleaning Non-flammable, virtually odour-free

Price £62.28
In stock
16 other products in the same category:

Blackfriar Professional Damp Proof Primer

Blackfriar Professional Damp Proof Primer is a moisture suppresent membrane for priming damp concrete floors and screeds. It helps prevent residual moisture seeping from the substrate, allowing earlier application of floor coatings. Product Features Designed to allow earlier access to concrete, screed, tile, vinyl and wood surfaces....

Price £75.61
In stock

Sikafloor Resiplot

Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes. Features & Benefits...

Price £981.67
In stock

707 MMA Metal Primer

A primer exhibiting outstanding adhesion for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.

Price £85.05
In stock

SCHÖNOX SDG

SCHÖNOX SDG is a very low emission special dispersion primer ready for use, suitable for the fast pre-treatment of unheated cementitious screeds with increased residual moisture up to 4.0 CM-% (85%-rh).

Price £158.13
In stock

Sikafloor 156

Sikafloor's 156 is a two part epoxy primer, levelling mortar and mortar screed. On its own it is a low viscosity, solvent free epoxy resin, that can be used for priming concrete substrates, cement screeds and epoxy mortars. Combined with Quartz Sands and Sika Extender T is becomes a levelling mortar and mortar screed. Features and Benefits:...

Price £54.65
In stock

Sikafloor 10 Pronto

Sikafloor 10 Pronto is a 4-part, low-viscosity, fast curing primer based on reactive acrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System. Sikafloor 10 Pronto consists of: Part A: Sikafloor 10 Pronto Resin Part B: Sikafloor Pronto Hardener Part C: Sikafloor Pronto AP 1 Part D: Sikafloor Pronto AP 2

Price £281.32
In stock

314 Clear Floor Sealer

A single pack, clear floor sealer to help with the prevention of dusting. Ideal where a low cost sealer is required for interior or exterior use on suitably prepared concrete, wood and metal.

Price £47.72
In stock

Sikafloor 220 W Conductive

Sikafloor 220 W Conductive is a two part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use. Features and Benefits: Highly electrostatically conductive Easy...

Price £117.16
In stock

Hydron Mona-Guard Dustproofer

Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting....

Price £26.60
In stock

RSL Resuprime ZP

Resuprime ZP, is a two-pack, high solids epoxy resin zinc phosphate primer coat principally designed to bond thin section resin based screeds and toppings to steel and ferrous structures, and is recommended for use as an anti-corrosion primer for Sherwin-Williams flooring products and on mezzanine areas, bridge decks, loading bays, ramps and...

Price £70.80
In stock

Sikafloor 11 Pronto

Sikafloor 11 Pronto is a two part, medium-viscosity, fast curing primer based on reactive acrylic resins for the Sikafloor Pronto Modular System. Fast curing, medium viscosity primer to achieve a pore free cementitious substrate. Sikafloor 11 Pronto consists of: Part A: Sikafloor 11 Pronto Resin Part B: Sikafloor Pronto Hardener

Price £291.25
In stock

Hydron Mona-Guard Extra

Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....

Price £69.25
In stock

Sikafloor 169

Sikafloor 169 is 2-part, very low yellowing, low viscous, transparent epoxy resin binder for mortars, screeds and seal coats like Sika CompactFloor and Sika Decofloor. Features and Benefits: Transparent Low VOC-content Low yellowing Good mechanical and abrasion resistance Low viscous Easy application Multi-purpose binder

Price £166.07
In stock

Britannia Concrete Floor Sealer

Concrete surfaces naturally dust and powder. In some cases this is not a problem, but there are many environments where this dusting would pose a significant problem, such as in commercial kitchens and laboratories. Advantages of Dust-proofing Reduction of contamination Health & Safety Cleanliness

Price £35.75
In stock

Hydron Mona-Guard Block Paving Sealer

The ideal solution to seal your paved driveway, with resistance to oil, weathering, UV and chemicals, you can have the peace of mind that the Mona-Guard Block Paving Sealer aids in delaying the age of your paving. Other Great Uses Footpaths. Garage forecourts. Town centres. Car parks.

Price £25.60
In stock

SikaBond Contractors PVA

SikaBond Contractors PVA is a multi-purpose bonding agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one...

Price £19.16
In stock