Jotun SeaForce 30
Jotun SeaForce 30 is the optimal choice if you are looking for a very good antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 30 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate.
Jotun SeaForce 30 is the optimal choice if you are looking for a very good antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 30 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.
Jotun SeaForce 30 is a one component acrylic, hydrolysing antifouling coating based on ion exchange technology. It provides good fouling protection which is achieved through self polishing characteristics reducing hull deterioration. It should be used as a finish coat in immersed environments only and is suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.
Features & Benefits
- 36 months excellent antifouling performance - Jotun SeaForce 30 will provide excellent antifouling performance at a budget friendly price due to its stable polishing rate and efficient biocide package.
- Optimised cost/performance ratio - The cost base for Jotun SeaForce 30 is very attractive, allowing owners and operators to limit their antifouling costs without compromising on quality.
- Extensive experience - 30 million litres of SeaForce have been painted on more than 15,000 vessels in the last 8 years.
- Jotun SeaForce 30 is a great cost effective antifouling solution - Used with an anticorrosive primer system suitable for purpose with Jotun Safeguard Universal ES as sealer coat/tie coat.
Approvals and certificates
- Compliant with IMO Antifouling System Convention AFS/CONF/26.
Additional certificates and approvals may be available on request.
Recommended for under water hull in newbuilding and dry docking. Designed for vessels trading at a wide range of speed and high activity. Jotun SeaForce 30 can be used for long service periods up to 60 months as a part of a complete coating system.
Can be used for offshore constructions and outside hull for static installations in deep sea.
Suited for vessels operating in global service, including fresh water exposure during newbuilding outfitting. Recommended for deep sea trade.
Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required.
The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations.
‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.'
Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Markus Schneider on 08/08/2018|
I would like to enquire your selling price for the below product 5 Ltr. Jotun SeaForce 30 Reference: 0TV099FVA 0TV099WVA I look forward to hearing from you. Yours Sincerely Markus Schneider
£83.75 + VAT per 5lt - Should you wish to place an order please contact our sales team on 0113 2455450 but first please ensure you have read and understood the professional use disclaimer in the product description.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close