Teamac Bilge & Locker Paint

530/G136/65/D
TEA100

Teamac Bilge & Locker Paint provides protection for the inside surfaces of the hull below the water line.  A resilient and hardwearing single pack coating providing available in 5 colours.

  • Hardwearing and resilient
  • Single Pack formulation
  • Use on inner hull walls
  • Suitable for use on wood, metal and GRP

Coverage Calculator

Colour
Pick a Colour
  • Current colour: Red
Close colour picker
  • White
  • Black
  • Grey
  • Red
  • Green
Size
Finish
£15.28(ex. VAT)
£18.34 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Teamac Bilge & Locker Paint is a modified long oil alkyd which comes in a gloss finish.  It can be used on the rounded portion and the lowest inner parts of a ship's hull.  Teamac Bilge Paint forms a transition between the bottom and the sides of a hull and provides moderate protection against oil and water.



Click To Jump To Section:




Features & Benefits


Advantages



Product Specification


Technical Data
Volume Solids Approx 35%
VOC Content Max 550 g/litre
SG 0.91 to 1.08°C
Viscostity 3.0 Poise - C&P @ 25°C
Flash Point Above 32 (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 35 to 40 μm 85 μm 12 m12/litre @ 35 microns D.F.T



The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 2 Hours
Dry To Handle: 8 Hours
Dry To Recoat: 8 hours or overnight
Fully Cured: 3 - 5 Days



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants.
  • Surfaces have to be prepared and primed with the suitable primer for that substrate.
  • Use direct on GRP.
  • Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.



Preceeding Coat




Mixing


  • Mix well before use.



Application Conditions


  • As dictated by normal good painting practice.
  • In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  Yes No Yes Yes



  • Thinner (Max vol): Thinners 14 (10%)
  • Nozzle Size: 0.015"
  • Nozzle Pressure: 1800 to 2000 psi
  • Cleaning Solvent: Thinners 14 or white spirit



Health & Safety


See safety data sheet - SDS 10494 in the attachments section above.

Click to go back to the top of the page

Product Details
100-183102

Data sheet

Manufacturer
Teamac
For Use By
General Use
Interior / Exterior Use
Interior
Water / Solvent Based
Solvent
For Use On
Wood
Metal
GRP
Application Method
Brush
Roller
Airless Spray
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L
2.5L
5L
Key Features
Hardwearing and resilient. Use on inner hull walls.
Dry to Handle (at 20°C)
8 Hours
Dry to Recoat (at 20°C)
8 hours or overnight
Fully Cured (at 20°C)
3 - 5 Days
Coverage
12m² per litre
Recommended Thinner/Cleaner
Teamac Thinner 14
Solids by Volume
Approx 35%
VOC
Max 550 g/litre
Touch Dry
4 Hours
Size
1 litre, 2.5 litre, 5 litre
Recommended Dry Film Thickness
35 to 40 μm
Recommended Wet Film Thickness
85 μm
UN Number
UN1263
Base Type
Solvent-Based
Exterior / Interior Use
Interior Use
Suitable For Use On
Wood (Marine)
Suitable For Use On
GRP (Marine)
Suitable For Use On
Metal (Marine)
Finish
Gloss
Application Method
Roller
Application Method
Brush
Application Method
Airless Spray
Manufacturer
Teamac
Components
1K
Usages
Marine Applications
Product Type
Alkyd
Colour Family
White
Colour Family
Green
Colour Family
Black
Colour Family
Grey
Colour Family
Red
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Teamac Bilge & Locker Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

    

You might also like

Teamac Aluminium Wood Primer

Teamac Aluminium Wood Primer, is an oil based primer that contains aluminium.  Used primarily to prevent staining on knotted or resinous timber, but also acts as an excellent heavy duty primer. Suitable for Narrowboats, Cruisers, Barges, Yachts and other Marine Applications.  It can be applied to suitably prepared timbers and boards.  Marine...

Price £15.06 (ex. VAT)
In Stock and Available for Delivery

Teamac QD Zinc Phosphate Metal Primer

Teamac QD Zinc Phosphate Primer is a high build, high performance quick drying metal primer. It has excellent anti-corrosive properties. Used as an anti-corrosive primer on iron and steel where rapid coating and finishing is required Ideal in coastal areas Touch Dry in 15 to 30 mins (at 20°C) Hard Dry in 6 hours (at 20°C) Can be...

Price £52.58 (ex. VAT)
In Stock and Available for Delivery

Teamac Thinner 14

A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application. Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...

Price £10.61 (ex. VAT)
In Stock and Available for Delivery

Teamac Penetrating Wood Primer White

Teamac Penetrating Wood Primer, is a general purpose, modified alkyd based wood primer for wood, especially useful for priming soft wood. It can be applied to suitably prepared timbers and boards. Overcoatable in 16 hours, it is compatible with Teamac Marine Gloss. Traditional Wood Primer For All Type of Wood. Provides Flat Finish For...

Price £12.04 (ex. VAT)
In Stock and Available for Delivery

Coo-Var Aluminium Wood Primer

Coo-Var Aluminium Wood Primer is an oil based primer that contains aluminium. Used primarily to prevent staining on knotted or resinous timber. Easy to apply. Also works as a heavy duty primer Resists resin staining Resists blistering of topcoats Interior/Exterior use Semi-matt finish Available in sizes from 500ml up to 5L Coverage...

Price £15.02 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery