Jotun Jotamastic 90 White B16 WG is a `Wintergrade` version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times.
Two component polyamine cured epoxy mastic coating
Surface tolerant
Abrasion resistant
High solids
High build
Short overcoating intervals, improving productivity
Robust and user friendly, offering safe application
Jotun Jotamastic 90 White B16 WG is a 'Wintergrade' version of Jotun Jotamastic 90 White B16 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Jotun Jotamastic 90 White B16 WG is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corosivity and can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
Jotun Jotamastic 90 White B16 WG is suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Areas of Use
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
Approved to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Low flame spread certificate acording to IMO FTPC Part
Grain, Newcastle Ocupational Health
Approved for PSPC for Crude Oil Tanks acording to IMO Res. MSC 288(87)
NORSOK System 1, Rev.5
Additional certificates and approvals may be available on request.
Features & Benefits
Short overcoating intervals, improving productivity
Robust and user friendly, offering safe application
Surface tolerant for maintenance and repair
Improved coating systems efficiency
Fast curing
Safe application at wide temperature range
Wide DFT range
Surface Tolerant
Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance & repair.
Durable solution in harsh environments
Excellent film formation on pitting rust and aged coatings
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage